Owner's Manual
OPERATION
10.FF(>>I)
&11.FB(I<<)
In the radio mode:
Long press the » 1
or
1« button for more than 2 seconds, the unit will switch to manual tuning
mode, briefly press the
»1
or
1« button to search the next
or
previous frequency step by step.
Short press the
»1
or
1« button, the automatic search will start, it will search upward
or
downward
for the strong signal radio station within the cuttent band. The auto searching will stop until find a
station.
In
the USB mode:
Briefly press the » 1
or
1« button to play the the next
or
previou track.
Press and hold the » 1
or
1« button to fast forward
or
fast backward.
12.BND/AMS
In radio mode.short press the BND/AMS button repeatedly to select the one
of
the radio band : FM 1,
FM 2,FM 3,
AM1
,AM2 in a cycle sequence. When you select a band, the word
F1
,
F2,
F3 for FM band,
and A 1, A2
for
AM band will be shown on the LCD display.
Press the BND/AMS button for several seconds.the radio searches form the current frequency and check
the signal strength until one cycle search is finished. When the 6 strongest stations will be stored into
the corresponding preset number within the current band. Short press the AMS button on the remote
control to scan each preset station
in
each band.
During USB playb
ac
k, press and hold the BND/AMS button to enter track search mode, the "TRK0000"
will appear on the display. Rotate VOL knob to select the "first number
".
Then press the 1« button to
move the "first number" to the left and enter the next number. Finally press the SEL button to
confirm and play the selected track.
If
no
any operation
in
5 seconds.it will play the current track.
13. MUTE
Short press the MUTE button to turn MUTE ON/OFF, when it is on, the MUTE will be flash on the LCD
and no sound output. When short press again it will be cancelled.
14. USB PORT
15.
AUX
IN
JACK
16.
~
If
you want to reset the unit, remove the front panel from the head unit, press the £ button to detach the
press the £ button to detach the front panel.
17
.
RESET
To
reset all parameters to factory default values. Press the £ button to detach the control panel form
the head unit and remove the control panel,then use a subject with a sharp point end to thrush the
RESET hole.
-