Owner's Manual
BLUETOOTH OPERATION
Pair and Connect
Prior to using the Bluetooth device as a handsfree system for a Bluetooth-enabled mobile
phone for the first time, you must pair and connect the two devices as follows:
1.
In
any mode, prior to pairing and connecting, the BT logo flashes
in
the LCD indicating
that no device is connected.
To
begin pairing, enable
BT
mode on your mobile phone.
2. When the phone finds the car audio system, the "BOSS MR634UAB" will be displayed.
3. Choose the "BOSS MR634UAB" from the device list to pair and connect with the car audio
audio system. Upon confirming, the BT logo will stop flashing.
4. When pairing is complete, the mobile phone audio will automatically transfer to the car
audio system whenever a call is made
or
received, or when the mobile phone plays
music.
Make a Call
•
To
make a call, dial the call directly from the paired mobile phone.
•
To
make a call with this Bluetooth handsfree system.
a) When linking up the Bluetooth mobile phone to this car audio handsfree system, press
the
~
button to access the dial telephone number mode, then press the "0~9",
*and#
button on the remote control to input the telephone number, the entered number will
be
shown on the LCD.
b)
If
a number has been incorrectly input, press the DEL button
or
!:.! button to delete it.
c) Press the
~
button to make outgoing call.
Redial Last Dialed Number
Press and hold the
~
button on the control panel to redial the last dialed phone number.
Answer a Call
• When the mobile phone is called, the incoming telephone number displays in the LCD.
•
To
receive the call, press the
~
button on the control panel
or
remote control.
Reject or End a Call
To
reject the call
or
end
an
active call, press the !:.! button.
Switch Audio Between Car and Phone
During a call, press the VOL knob/button to switch the audio source from the car audio
system back to your mobile phone.
Adjust Talk Volume
• During a call, use VOL knob
or
VOL+
and
VOL
- buttons to adjust the volume level.
• Use the MUTE button to mute sound.
Audio Streaming (A2DP)
1. Press the
C!.>/SRC
button to enter BT mode and display pause
in
the LCD.
2. When a mobile device is paired, music played through that device will automatically be
heard through the car audio system.
3. Press the
>>I
or
I<<
button to play the next
or
previous song/file on the mobile phone.
4.
Press the
>II
button to pause
or
resume music playback.
-