Owner's Manual
Radio Operation:
1.
To
select radio band
In
RADIO mode, press the BAND button shortly and repeatedly to select your desired radio band
in
sequence and circulation as follows:
-->FM 1-->FM2-->FM3-->AM 1-->AM2-->
2.
To
select for radio station manually or automatically
Press >>I
or
I<< button to automatically search up
or
down for radio station frequency,
Press >>I
or
I<< button and hold for about 2 seconds to activate MANUAL searching mode.
Then press
>>1
or
1<<
button repeatedly to manually search up
or
down for your desired station from the
current frequency.( If
in
MANUAL Mode and without further operation, the unit will change to AUTO mode
a few seconds later.)
3.
To
store the current station or turn on the preset station
In
RADIO mode:
A) Press one
of
1-6 number buttons and hold for about 1 second to store the current station
in
the
preset memory bank
of
the number button for the current band.
When a RDS station is being stored,
PI,
PS, AF list are stored.
B) Press one
of
1-6 number buttons to turn on the preset station stored
in
the preset memory bank
of
the number button for the current band.
In
RDS mode, the strongest AF is turned on after AF searching.
4.
To
automatically store for the strongest stations and scan for each stations
A) Press APS button and hold for about 1 second, it will search from the current frequency and check
the signal strength until 1 cycle search is finished on current band. Then, the 6 strongest available
stations will be preset to the corresponding preset numbers. When the Auto-storage operation is
completed, it will execute the Preset Scan continuously.
B) Press the APS button to scan all preset stations
in
the memory
of
the current band and stay on each
memory stations for about 5 seconds.
To
stop preset scan, press this button again.
C)
Press
the
SCAN
button
to
scan
the radio frequency.
If
a valid signal
has
detected, the current frequency
will
be
hold and blinking for 5 seconds, then press
SCAN
again
to
stop and remain the current frequency;
otherwise, the radio will go on
to
scan
the other radio frequency 5 seconds later.
5.
To
tune for RDS station
Press and hold PTY button for about 1 second, the PTY group
is
on,
then rotate the VOL knob
to select one of the following mode:
<-->NEWS<-->AFFAIRS<-->INFO<-->SPORT<-->EDUCATE<-->DRAMA<-->CULTURE
<-->SCIENCE<--> VARIED<-->WEATHER<--> FINANCE<-->CHILDREN<-->SOCIAL
<-->RELIGION<-->PHONE IN<--> TRAVEL <-->LEISURE<-->DOCUMENT < -->ALARM
<-->POP
M<
-->ROCK M<-->EASY M<-->LIGHT M<--> CLASSICS<-->OTHER M
<-->JAZZ<-->COUNTRY <-->NATION M<-->OLDIES<-->FOLK M<--> TEST
After selecting one of the PTY programs, press
>>1
or l<<,it will automatically search for the station of the
PTY program. If the station of the PTY program does to exist, it will display PTY NONE
and
then return back to
the previous radio.
6.
To
alternate the weak signal
in
RDS station with a strong one
Press SEL button and hold for about 1 second to turn on MENU mode, then press SEL button
repeatedly to select AF mode, rotate the VOL knob to select AF ON, then AF flash
in
display.
When AF switching mode is selected, the radio checks the signal strength
of
AF all the time. The
5