Owner's Manual
interval
of
checking time of each AFs depends on the signal strength of current station, from a few minute
for strong station to a few seconds for weak station. Every time that new AF
is
stronger than current
station, it switches over to that frequency for very short time, and NEW FREQUENCY is displayed for 1-2
second. Because the mute time
of
AF switching or checking time
is
very short, it
is
almost inaudible
in
case
of
normal program. (When AF flashes on LCD, it will search for RDS station. If AF and TP flash on
LCD, it can only search for traffic announcement station).
During
FM
mode, when AF
is
on, SEEK, (SCAN), AUTOMEMORY function can only receive and save
RDS program.
7.
TA
[TRAFFIC ANNOUNCEMENT]
Press SEL button and hold for about 1 second to turn
on
MENU mode, then press SEL button repeatedly
to select AF mode, rotate the VOL knob to select
TA
ON, then
TA
flash
in
display.
A) When
TA
mode is on(TA is displayed on LCD), it will begin to seek
TA
station and
TA
SEEK will
be
displayed
on
LCD for a while.
When traffic announcement
is
transmitted:
1) If the unit is
in
SO,
USB or disc mode, it will switch to radio mode temporarily.
2) Temporarily switch over to
an
EON linked station when EON detects a traffic announcement on
that other program, and TP will be displayed on LCD.
3) If volume level is below 20, volume level is raised to 20, and returns to its previous mode and
volume level when the traffic announcement is over.
If volume is adjusted during traffic announcement, only the traffic announcement volume
is
valid.
*
TA
interruption function:
The current traffic announcement
is
cancelled by pressing this
key.
But the
TA
mode will not be off.
* When
TA
is
on, SEEK, (SCAN), AUTO MEMORY function can
be
received or saved only when
traffic program identification code has been received.
USB or Disc Operation:
1.
To
load/unload disc
Press the REL button to flip down the front panel and then insert the disc into the disc slot or press
the
EJ
button to eject the disc.
2.
To
load/unload
SO
card or USB
When playing
SO
or USB, insert the
SO
card or USB stick into
SO
slot or USB port. Then the playing
mode will
be
changed into
SO
or USB mode and display CARD or USB
on
LCD(When
SO
card and USB
stick are both inserted into their slot or port, the playing mode will
be
changed into the mode
of
the later
one), and then play the first track of
SO
or USB. When needing pull out the
SO
card, firstly press MMC/SD
card once, then pull it out.
3.
To
select next or previous track to play
Press the
>>I
button to play the next track.
Press the
1<<
button to play the current track from the beginning of the current track.
4.
To
select next or previous
10
track to play
In
SO,
USB or MP3/WMA disc playback mode, press the 6 or the 5 button to move up or down 10
tracks at a time.
When the remained total track
is
less
than 10, the both buttons are inactive.
5.
To
play fast forward or backward
During normal playback, press
>>I
or
I<<
button and hold to skip forward or backward.
Release to resume normal playback
6.
How to use the PLAY/PAUSE/TOP button
During playback, press
1/>11
button to pause
SO,
USB or Disc playback.
Press again to resume MMC/SD, USB or Disc playback.
6