Owner's Manual

Bluetooth Handsfree System:
1.
Pairing and Connection
1) Turn on the Bluetooth mode of the mobile phone;
2) Select
Finding the Bluetooth Device. After searching
is
finished, it
will
show the name
of
the
Bluetooth Device available.
Select
it and switch to the interface for password,
Input
the password
0000
and enter it. Then it
will
show pair
OK
..
3) For some mobile phones, they can
automatically
connect with the BT dvice of the car audio system
and after pairing is ok; for some mobile phones, they need to select the paired BT device and press the
CONNECTION
button. When connection
is
OK,
the
LCD
of
the car audio system
will
show
CONNECT.
2.
Use the mobile phone to do connection or disconnection
A) Use the mobile phone to do connection or disconnection
1)
In
the connection status, find the paired and connected Bluetooth Device, then press the
disconnection button to do disconnection.
2)
In
the disconnection status, find the paired and disconnected Bluetooth Device, then press the
connection button to do connection.
B)
When turning
on
the power again (after Ace off), the front panel can search the phone that was paired
automatically
and
be
connection. And it
will
take you about
10-15
seconds.
Note:
(1) Bluetooth icon appears
on
LCD
only when
in
connection status
(2)
In
the connection status: Mobile phone transfers to the car audio whenever a dialing
takes place; Mobile phone transfers to the car audio whenever receiving a
call.
3.
Dialing when
in
connection status
A) Dial with the mobile phone directly.
B)
After inputting the phone number via mobile phone, press the TEL button to execute the dialing.
Notes: The talking time
will
appear
on
LCD
if dialing
is
successful and it
is
received.
~
'
4.
AccepU End
Call
A) During ringing, press TEL button to accept the
call
D)
During talking, press HAND UP button to end the
call.
5.
Talking volume level setting
At talking status, use the
VOL knob to adjust the sound output, but this volume level can't
be
reserved.
6.
To
transfer the audio of a
file
played by Mobile Phone to the
Car
Audio Player
If the mobile phone supports A2DP and could play audio or video files, when the Mobile Phone plays
an
audio (For some Mobile Phones, you must select Play by BT firstly), the playing will
be transferred to the
Car
Audio Player.
In
A2DP mode, if the Bluetooth device
of
the Mobile Phone support
AVRCP,
the functions
of
the
>>1,
1<<
and PLAY/PAUSE buttons are the same as one
in
disc mode(no fast forward /backward functions
,for
the
>>Ill<<
buttons). The other buttons available
in
disc mode are not available.
In
A2DP mode, if the Bluetooth device of the Mobile Phone supports
AVRCP,
pressing the MODE
button
will
switch between the radio, disc,
USB,
CARD and
A2DP.
After entering A2DP mode again, it will
resume playback after you press the PLAY/PAUSE button.
In
A2DP mode, if switching the music play mode to the radio mode, music
will
resume
in
about
10
seconds.
8