User Manual

4
Panel Descriptions (Nextone Stage / Artist)
Top Panel
1 [CH SELECT] button
Switches between the CLEAN channel and the LEAD channel.
The indicator of the selected channel is lit.
* Hold down this button for one second or longer to select
CUSTOM mode. In CUSTOM mode, sound settings can be made
only using the dedicated software.
http://www.boss.info/
2 INPUT jack
Connect your electric guitar here.
3 [BOOST] button
Boosts the gain. On the CLEAN channel, this produces a
pleasant crunch sound. On the LEAD channel, this produces
hard distortion.
4 [TONE] button
On the CLEAN channel, this makes the mid- and high-frequency
ranges sparkle, producing a crisp sound. On the LEAD channel,
this produces a fat tone.
5 CLEAN channel
Lets you create a broad range of sounds from undistorted clean
sound to light overdrive.
[VOLUME] knob
Adjusts the volume of the clean channel.
6 LEAD channel
[GAIN] knob
Adjusts the gain (amount of distortion) of the LEAD channel.
Use this knob to change from crunch sound to hard distortion.
Turning the [BOOST] button on raises the gain of the LEAD
channel.
[VOLUME] knob
Adjusts the volume of the LEAD channel.
7 EQUALIZER
[BASS] knob
Adjusts the sound level of the low-frequency range.
[MIDDLE] knob
Adjusts the sound level of middle-frequency range.
[TREBLE] knob
Adjusts the sound level of the high-frequency range.
8 EFFECT
[DELAY] button
Turns the DELAY on/o.
[DELAY] knob
Adjusts the depth of delay eect.
[TAP] button
Sets the delay time. When you press this button two or more
times, the delay time is set to the interval between presses.
[REVERB] knob
Adjusts the reverb depth.
9 [PRESENCE] knob
Adds lustrous outline to the mid- and high-frequency range.
This is eective when you want to improve the denition of the
sound.
10 [MASTER] knob
Adjusts the overall volume.
18 19
16 17
14
15
Rear panel/Bottom panel
2 4 5 13109 11 126 7 8
1 3
Top panel
20