User Manual

7
Panel Descriptions (Nextone Special)
Top Panel
1 [CH SELECT] button
Switches between the CLEAN channel and the LEAD channel.
The indicator of the selected channel is lit.
Settings of the PRE AMP, EQUALIZER, EFFECT, and POWER AMP
knobs and buttons can be made individually for each channel.
CLEAN channel
LEAD channel
2 INPUT jack
Connect your electric guitar here.
3 PRE AMP (CLEAN channel)
Lets you create a broad range of sounds from undistorted clean
sound to light overdrive.
[EXTRA HEAD ROOM] button
Turning this on lets you obtain an even more dynamic response.
[VOLUME] knob
Adjusts the volume of the clean channel.
[TONE] button
Makes the mid- and high-frequency ranges sparkle, producing
a crisp sound.
4 PRE AMP (LEAD channel)
[GAIN] knob
Adjusts the gain (amount of distortion) of the LEAD channel.
Use this knob to change from crunch sound to hard distortion.
Turning the [BOOST] button on raises the gain of the LEAD
channel.
[VOLUME] knob
Adjusts the volume of the LEAD channel.
[TONE] button
Produces a fat tone.
5 EQUALIZER
[AMERICAN] / [BRTISH] button
Switches the equalizer type between American and British
types.
[BASS] knob
Adjusts the sound level of the low-frequency range.
[MIDDLE] knob
Adjusts the sound level of middle-frequency range.
[TREBLE] knob
Adjusts the sound level of the high-frequency range.
6 EFFECT
[BOOST] button
Turns the BOOST on/o.
[BOOST] knob
Adjusts the gain (amount of distortion).
On the CLEAN channel, this produces a pleasant crunch sound.
On the LEAD channel, this produces hard distortion.
[DELAY] button
Turns the DELAY on/o.
[DELAY] knob
Adjusts the depth of delay eect.
[TAP] button
Sets the delay time. When you press this button two or more
times, the delay time is set to the interval between presses.
[REVERB] button
Turns the REVERB on/o.
[REVERB] knob
Adjusts the reverb depth.
20
17 18
13
15
Rear panel
1614 19
2 4 128 10 115 6
7
1
9
3
Front panel