User Manual

11
Deutsch
Français Italiano Español
Português
Nederlands
EnglishEnglish
Track 1/2 Settings
Adjusting the Track Playback Level
1. Press the [TRACK] button of the track that you want to adjust.
The button blinks green.
Track 1 Track 2
2. Turn the [VALUE] knob to adjust the playback level.
Specifying the Track Playback Method
1. Press the button of the desired function.
2. Press the [TRACK] button of the track that you want to specify.
Button [TRACK] button Explanation
[REVERSE] button
Playing a Track Backward (Reverse)
Species whether the track plays normally or in reverse.
* If reverse playback is specied, you can’t switch to overdubbing when recording ends.
Unlit Normal playback.
Purple Reverse playback.
[UNDO/REDO] button
Cancelling a Recording/Overdub (Undo)
Here’s how to cancel recording/overdubbing for a track.
1. Press the [UNDO/REDO] button.
2. Press the [TRACK] button of the track that you want to undo/redo.
* Redo is only available for overdub.
3. To return to the normal state, press the [UNDO/REDO] button once again.
Orange Undo is available
Red Redo is available
Unlit Undo/redo unavailable
[LOOP/1 SHOT] button
Specifying the Track Playback Method (Loop/One-Shot)
This species whether the track plays as a normal loop or as one-shot playback.
One-Shot: ON
One-Shot: OFF
Track 1
Track 2
If One-Shot is ON, playback
will stop when it reaches the
end of the phrase.
Unlit Conventional loop playback.
Blue
The phrase will play only once from the beginning to the end of the track, and then stop
automatically (One-Shot Playback).
If you press the [
p
/
t
] button during playback, playback will begin again from the beginning
of the track (Retrigger Playback). Overdub cannot be carried out.
Selecting the track that’s
controlled by an external pedal
Press the [TRACK] button twice in
succession.
The track whose button you press is the track
that’s controlled by an external pedal.
Reference
For more about the functions that can be
controlled by an external pedal, refer to
“Parameter Guide” (PDF).