User Manual

13
Deutsch
Français Italiano Español
Português
Nederlands
EnglishEnglish
Settings for the Entire RC-202 (System Settings)
Settings that apply to the entire RC-202, such as auto-o (automatic power-o), USB, and MIDI, are called “system settings.”
1. Press the [SETUP] button.
2. Press a button to select the category of settings that you want to make.
MIDI
Make settings related to MIDI.
GENERAL
Make settings such as auto-o.
I/O
Make settings related to input
and output.
USB
Make settings related to USB.
3. Press the [VALUE] knob to select a parameter, and turn the [VALUE] knob to edit the value.
Reference
For details on the parameters, refer to “Parameter Guide” (PDF).
4. Press the [SETUP] (EXIT) button to return to the Play screen.
“Factory reset” is an operation that returns the
RC-202’s system settings to their factory-set state.
Factory reset can return the system settings to their
factory-set state and can also initialize all banks.
* The RC-202 contains demo data (bank 8).
If you execute factory reset “ALL” or “B8,”
the demo data is also erased, and cannot be
recovered. Before you proceed, make a backup
as described in “Backing up to your computer”
(p. 15).
1. Long-press the [SETUP] (EXIT) button and
[MEMORY] button simultaneously.
The Factory Reset range setting screen appears.
2. Use the [VALUE] knob to specify the range
of settings that you want to return to their
factory-set state.
Value Explanation
ALL
The system settings will be returned to
their factory-set state, and all banks will be
erased (initialized)
SYS
The system settings will be returned to their
factory-set state
B1–B8
The selected bank will be erased (initialized)
* If you execute “ALL” or “B1–B8,” the RC-202’s
banks will be initialized, and cannot be returned
to their previous state.
3. If you want to proceed with the factory reset,
press the [WRITE] button.
When the factory reset is completed, you return to
the Play screen.
Adjusting the Output Volume of the OUTPUT Jacks and the Headphones
Here’s how to adjust the output volume of the RC-202.
1. Press the [SETUP] button.
2. Press the [BEAT] (I/O) button.
3. Press the [VALUE] knob to select the parameter; then turn the [VALUE] knob to adjust the value.
Parameter Value Explanation
OLV
0–100 The output volume of the OUTPUT jacks will be adjusted.
PLV
0–100 The volume of the headphones will be adjusted.
4. Press the [SETUP] (EXIT) button to return to the Play screen.
Restoring the Factory Settings (Factory Reset)