User Manual

Basic Operation Guide
5
Deutsch
Français Italiano Español
Português
Nederlands
EnglishEnglish
Track Settings
Here you can specify the playback level and playback
method of the tracks.
Adjusting the Playback Level
1. Press the [TRACK] button.
2. Turn the [VALUE] knob to adjust the playback
level.
Specifying the Playback Method
1. Press the button of the function that you
want to set.
[REVERSE] button
Species either conventional
playback or reverse playback.
[UNDO/REDO]
button
Here’s how to cancel
recording/overdubbing for
a track.
[LOOP/1 SHOT]
button
Species either normal loop
playback or one-shot playback.
2. Press the [TRACK] button to switch the
setting.
Display
This shows various
information
according to the
operation you’re
performing.
1-1
Startup screen (Play screen)
Phrase memory
number
Bank
number
Selecting a Phrase Memory and Bank
Selecting a Phrase Memory
1. Press the [MEMORY] button.
2. Use the [P. SHIFT] (1)–[DELAY] (8) buttons to select a
phrase memory.
Alternatively,
In the Play screen, turn the [VALUE] knob to select a phrase
memory.
Selecting a Bank
1. Press the [MEMORY] button.
2. Turn the [VALUE] knob to select a bank.
3. Use the [P. SHIFT] (1)–[DELAY] (8) buttons to select a
phrase memory.
Alternatively,
In the Play screen, select a bank by turning the [VALUE] knob
while pressing it.
Saving a Phrase Memory
If you select a dierent phrase memory or turn o the power after recording or
editing the settings, the recorded content or edited settings will be lost. If you want
to keep the data, you must save it.
1. Press the [WRITE] button.
2. Use the [P. SHIFT] (1)–[DELAY] (8) buttons to select the save-destination
phrase memory.
3. Press the [WRITE] button to save the phrase memory.
Input FX, Track FX
You can apply eects to the audio input and to the sound of the
tracks, respectively.
Turning an Eect On
Press the [P. SHIFT]–[DELAY] button to make
it light.
Turning an Eect O
Press the lit [P. SHIFT]–[DELAY] button to make
it go dark.
Controlling an Eect
Turn the [INPUT FX] / [TRACK FX] knob.
Editing an Eect
1. Press the [P. SHIFT]–[DELAY] button to make it blink.
2. Turn the [VALUE] knob to select the type.
3. Press the [VALUE] knob to select the parameter; then turn the [VALUE]
knob to adjust the value.
4. To select the track to which the eect is applied, press a [TRACK] button
to make it blink (track FX only).
5. Press the [SETUP] (EXIT) button to return to the Play screen.
Input FX
P. SHIFT
This eect lets you change the
pitch.
LO-FI
This eect intentionally degrades
the sound to create a distinctive
character.
RING
MOD
Gives a metallic character to the
sound, creating the impression
that the sound is going out of
focus.
DELAY
Adds a delayed sound to the
direct sound, giving the sound
greater depth or creating
special eects.
Track FX
BEAT
The track plays repeatedly in
synchronization with the beat.
FILTER
A lter modies the brightness
or thickness of the sound by
cutting a specic frequency
range.
SLICER
Repeatedly cuts the sound,
transforming a conventional
sound to create the impression
of a rhythmic backing.
DELAY
Adds a delayed sound to the
direct sound, giving the sound
greater depth or creating special
eects.
Reference
For more about the parameters, refer to “Parameter Guide” (PDF).
Eect button indications
Blinking
purple *
Editing
Lit purple * On
Lit red On
Unlit O
*: Eects for which the
[INPUT FX]/[TRACK FX]
knobs are operational
page
10
page
11