Specifications

12/16/2002
6
Electrical Wiring
COMMAND LIGHT SHADOW control wires are routed through 3 self-sealing
connectors. To install, drill 3 7/8” diameter holes 2-1/2” center to center. Apply
silicone sealer to underside of connector before inserting into hole. Fasten connector
securely with nuts.
Run the control wires from the control box through the vehicle and connect to the
COMMAND LIGHT SHADOW.
Power Connections
Make power connections to the control box as illustrated below. Be sure to provide adequate safety
fusing for all power connections.
BLUE/BLACK WHITE/BLACK
RED GREEN BLACK/WHITE ORANGE/BLACK BLUE/WHITE RED/BLACK BLUE WHITE ORANGE BLUE/BLACK WHITE/BLACK WHITE/RED
BLACK 120VAC
WHITE NEUTRAL
ORANGE 12VDC
GREEN GROUND
BLACK
WHITE
GREEN
BLACK
WHITE
12/3 SJOOW
AC POWER IN
14/2 PVC
DC POWER IN
ORANGE BLUE/WHITE ORANGE/BLACK RED/BLACK RED BLUE WHITE BLACK/WHITE GREEN WHITE/RED
CONTROL
22/20 PVC