User Manual

14
Using the HOLD Function
In the Internal Sound Mode (when MODE 1–9), you can use the Hold function that allows you
to output the effect sound (synthesizer sound) continuously while holding the pedal down. It
is also possible to mix the direct sound to the effect sound continuously being output by play-
ing the bass guitar to it.
1. Turn the Effect On by pressing the
Pedal Switch.
2. Select the Internal Sound Mode (MODE
1–9) using the Mode switch.
Set the other knobs to your taste.
3. Play the bass guitar using single notes.
4. Press the Pedal Switch once again while
the effect sound you wish to output con-
tinuously is being played, to hold it.
The Hold function remains in effect and
the CHECK indicator flashes as long as
you continue to press the Pedal Switch. In
this state, the SYB-5 continues to output
the effect sound.
5. To switch off the Hold function, release
the Pedal Switch.
The CHECK indicator will stop flashing
and instead light constantly, showing that
the unit is returned to the normal Effect
On status.