User Manual

9
Connections
* To ensure stable conditions, connect the
SYB-5 directly to your bass’s output.
* When running the unit on battery power,
inserting a plug into the INPUT Jack will
automatically switch the unit on.
* The use of an AC adaptor is recommended as
the unit’s power consumption is relatively
high. Should you prefer to use batteries,
please use the alkaline type.
* To prevent malfunction and/or damage to
speakers or other devices, always turn down
the volume, and turn off the power on all
devices before making any connections.
* If there are batteries in the unit while an AC
adaptor is being used, normal operation will
continue should the line voltage be inter-
rupted (power blackout or power cord discon-
nection).
* Once the connections have been completed,
turn on power to your various devices in the
order specified. By turning on devices in the
wrong order, you risk causing malfunction
and/or damage to speakers and other devices.
When powering up:
Turn on the power to your guitar amp last.
When powering down:
Turn off the power to your guitar amp first.
* Always make sure to have the volume level
turned down before switching on power.
Even with the volume all the way down, you
may still hear some sound when the power is
switched on, but this is normal, and does not
indicate a malfunction.
* When operating on battery power only, the
CHECK indicator will become dim when
battery power gets too low. Replace the
battery as soon as possible.