WATCH CARE AND MAINTENANCE, OPERATING INSTRUCTIONS WARRANTY AND SERVICE GUIDE
TABLE OF CONTENTS 2- and 3-Hand Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Date/Big Date Display Models - Type A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Date/Big Date Display Models - Type B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Automatic Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
oPeRaTInG InsTRUCTIons 2- and 3-Hand Models Crown 1 2 Seconds hand Crown Positions: Position 1 - Normal position Crown pushed against case Position 2 - To set TIME: Rotate crown in either direction 448 11-3-04 11-3-04 1
oPeRaTInG InsTRUCTIons Date/big Date Display Models - Type a Crown 1 2 3 Date display Crown Positions: Position 1 - Normal position Crown pushed against case Position 2 - To set DATE*: Rotate crown clockwise NOTE: For models with DAY/DATE display(s): Rotate crown clockwise to set DATE, And counterclockwise to set DAY Position 3 - To set TIME: Rotate crown in either direction *CAUTION: Never set the date when the hands are between 9:00 PM and 3:00 AM Doing so could damage the calendar mechanism NOTE: Th
oPeRaTInG InsTRUCTIons Date/big Date Display Models - Type b Big Date display 2 7 60 15 45 30 Crown 1 2 3 Small seconds hand Crown Positions: Position 1 - Normal position Crown pushed against case Position 2 - To set DATE/BIG DATE*: Rotate crown clockwise NOTE: For models with DAY/DATE display(s): Rotate crown clockwise to set DATE, And counterclockwise to set DAY Position 3 - To set TIME: Rotate crown in either direction Big Date models feature an oversized date window with two singledigit disks th
oPeRaTInG InsTRUCTIons automatic Models Minute hand Hour hand 60 05 Crown 1 2 25 30 35 Seconds hand 20 40 15 45 10 50 55 The motion of your arm during normal daily activities should be sufficient to keep your automatic watch wound However, if you have not worn your watch for several days and it has stopped, you will need to wind the movement by hand before setting the time To wind the Movement: With the crown in position 1, flush against the case, turn the crown clockwise, completing appro
oPeRaTInG InsTRUCTIons Multi-eye Models Day hand Crown Date hand 1 2 3 24-Hour time hand Second hand Multi-eye watches are powered by multi-function movements that enable them to report such information as month, weekday and date via apertures or “eyes” in the dial Project #: 925 Designer: 5 Tatiana G Creation: 10.26.07 Modification: 4.28.
oPeRaTInG InsTRUCTIons Multi-eye Models with Retrograde Day/Date Hour hand Minute hand Crown Day hand Date display Seconds hand Crown Positions: Position 1 - Normal position Crown pushed against case Position 2 - To set DATE*: Rotate crown counterclockwise To set DAY: Rotate crown clockwise Position 3 - To set TIME: Rotate crown in either direction *NOTE: If the Date is set between 9:00 PM and 1:00 AM, the date may not change on the following day 6
oPeRaTInG InsTRUCTIons Multi-eye Models with Date/24-Hour Hand Minute hand Date hand Hour hand Crown 1 2 3 Seconds hand 24-Hour hand Crown Positions: Position 1 - Normal position Crown pushed against case Position 2 - To set DATE*: Rotate crown counterclockwise Position 3 - To set TIME: Rotate crown in either direction *NOTE: If the Date is set between 9:00 PM and 3:00 AM, the date may not change on the following day 7
oPeRaTInG InsTRUCTIons Multi-eye Models with Day/Date/24-Hour Hand Day hand Crown Date hand 1 Second hand 2 3 24-Hour time hand To set Day, Time and Date: NOTE: It is important to follow steps in this sequence: 1 Pull crown out to position 3 2 Turn crown clockwise until Day hand points to correct day NOTE: While watch is running, hand indicating day of week will gradually and automatically advance between midnight and about 5:30 AM 3 With crown still in position 3, continue turning crown clockwise u
oPeRaTInG InsTRUCTIons Multi-eye Models with Month/Day/24-Hour Hand/Date To set Day: Minute hand Month hand Hour hand Day hand 1 Pull crown out to position 3 2 Turn crown clockwise: Day hand will advance by 1 day each time the hour and minute hands pass 4:00 AM (04:00) Push button A Quick correction of month 8 3 When desired day is reached, push crown back in to position 1 Crown To set Month: 1 2 3 Date display Push button B Quick correction of second time zone/24-hour hand 24-hour time hand Second
oPeRaTInG InsTRUCTIons Dual-Time Retrograde Models with big Date Minute hand Big Date display Hour hand Crown Seconds hand Retrograde dual time display (24-hour hand) Crown positions: Position 1 - Normal position Crown pushed against case Position 2 - To set BIG DATE*: Rotate crown clockwise To set DUAL-TIME/RETROGRADE 24-HOUR HAND: Rotate crown counterclockwise Position 3 - To set TIME: Rotate crown in either direction NOTE: The seconds hand will stop moving while hour and minute hands are being set,
oPeRaTInG InsTRUCTIons Dual-Time GMT Models NOTES: Setting the Hour hand on the exact hour provides the most accurate time setting If the Hour hand is set between hours, it may prevent the time from being accurately displayed and read Minute hand Hour hand The Date is synchronized with this Hour hand; be sure to take AM/PM time into account when adjusting it Date display Crown To set Date: The Date is synchronized with the time in the first time zone G GMT 1 2 3 1 Pull crown out to Position 2 2 Ro
oPeRaTInG InsTRUCTIons Chronographs Hour hand Chronograph minute hand A Minute hand 1 B Chronograph seconds hand Crown 2 3 Date display Small seconds hand A chronograph combines two time-keeping functions: In addition to indicating the time on its dial, a chronograph can also be operated like a stopwatch to measure intervals of time 12
oPeRaTInG InsTRUCTIons analog Chronographs 1/1 of a second – Type a with center-mounted chronograph seconds hand and chronograph minutes counter Hour hand Minute hand Chronograph minute hand A Hour hand Minute hand 1 B Chronograph seconds hand 24-Hour display A Crown Small seconds hand Crown 2 3 Date display 5 ATM Chronograph seconds hand Small seconds hand 1 2 3 B Date display Chronograph minute hand Crown positions: 4 Repeat steps 2 and 3 until event is ended Position 1 - Normal posit
oPeRaTInG InsTRUCTIons analog Chronographs 1/1 of a second – Type b with center-mounted chronograph seconds hand, chronograph hour and minutes counters and small seconds subdial 3 Press button a again when the event resumes Small seconds hand Hour hand A 5 Push button b to reset to zero To synchronize Chronograph Hands: Minute hand Chronograph hour hand Chronograph seconds hand 4 Repeat steps 2 and 3 until event is ended Chronograph minute hand After a battery change or in the event of an error, you
oPeRaTInG InsTRUCTIons analog Chronographs 1/1 of a second - Type C with small chronograph seconds and 24-hour hands Minute hand Hour hand Chronograph minute counter Seconds hand Small chronograph seconds hand Date display To operate the Chronograph: NOTE: The chronograph function can be used to time an event up to 60 minutes in duration, in whole second increments IMPORTANT: Crown must be in position 1, and chronograph hands must be at 60 (zero) before stopwatch is started Do not use chronograph while c
oPeRaTInG InsTRUCTIons analog Chronographs 1/1 of a second - Type D with small chronograph seconds and 24-hour hands To measure the combined time of a series of shorter events (for example, the actual playing time of a football game, where play is repeatedly interrupted): A 1 Push button a to start the stopwatch when the event begins 24-Hour display Chronograph minute hand Crown 1 Small chronograph seconds hand 2 Push button a to stop the timing when the event is halted 2 3 Press button a again when
OPERATING INSTRUCTIONS Analog Chronographs 1/10 of a Second D J K W A M H E C L M H E Crown 1 A G 2 Crown 1 B S 2 S G F C Legend Legend H - Hour hand M - Minute hand S - Small seconds hand (subdial at 2:30) H - Hour hand M - Minute hand S - Small seconds hand C - Chronograph seconds hand (center mounted) E - Chronograph minutes counter (subdial at 9:30) G - Chronograph tenths-of-a-second counter (subdial at 6) D - Day of week window J - Month window F - Date indicator hand C - Chronogr
6. Press button A to stop chronograph. 5. Use corrector button W (on side of case at 10 o’clock) to advance day of week shown in day window D. 7. Take a reading of the final time, for example: 27 minutes, 3 seconds, 4/10 seconds. 6. Use corrector button K (on side of case at 2 o’clock) to advance month shown in month window J. 8. Press button B to reset chronograph hands to zero.
oPeRaTInG InsTRUCTIons analog Chronographs 1/20 of a second split-time functions: 1/20 second chronograph hand Minute hand 2 Press button b to momentarily stop chronograph Start/stop Hour hand 3 Read off the intermediate time 4 Press button b to resume chronograph function Hands will fly back, catching up with ongoing event Crown Small seconds hand Chronograph seconds hand To take intermediate time readings as a race progresses: 1 Press button a to start chronograph Split/reset Date display 24-Hou
oPeRaTInG InsTRUCTIons Regatta Chronograph Removable links Alarm hand Hour/seconds counter To display: • count down seconds • race timing REGULAR hours BRACELET LINK Seconds hand BAR CLASP LINK Push button A I I2 H 50 24 3 MIN . 6 45 IN 8 0 2 25 . 6 MIN 7 .
oPeRaTInG InsTRUCTIons Removable links REGULAR BRACELET LINK BAR CLASP LINK Certain bracelet watches feature bar-shaped connecting links that function like jewelry clasps, allowing you to achieve a quick, custom fit TIPS: We recommend that you adjust one side of the bracelet at a time To ensure that the watch will sit properly on the wrist, it is best to remove/add an equal number of links on each side If you must remove an odd number, take the extra link from the 6 o’clock side To remove links: 1 Hold o
oPeRaTInG InsTRUCTIons Interchangeable bracelet/strap Models Tension-pin style REPLACING STRAP (b) REMOVING STRAP (a) 1a 1b 2a 2b 3a 3b 21 22
oPeRaTInG InsTRUCTIons Interchangeable bracelet/strap Models Hook and bar style Removing Strap Replacing Strap 1 2 5 6 3 4 7 8 23 22
oPeRaTInG InsTRUCTIons Convertible bracelet/strap Models Converting Bracelet to Strap 2 1 4 3 23 24
WaRRanTy & seRvICe InfoRMaTIon Please see the printed warranty and service guide enclosed with your watch for complete warranty and service information – or return to our service website home page and click on the Warranty and Service Information link 25 24
CaRe anD MaInTenanCe Your watch has been developed with meticulous attention to quality, function and detail Please read the following information and instructions carefully to learn about the features, proper care and operation of your new timepiece For additional information on service and repairs, please see your Warranty & Service Guide booklet – or return to our service website home page and click on the Warranty and Service Information link shock All our watches have shock-resistant movements and are
WATCH CARE AND MAINTENANCE, OPERATING INSTRUCTIONS WARRANTY AND SERVICE GUIDE
oPeRaTInG InsTRUCTIons 2- and 3-Hand Models Crown 1 2 Seconds Hand Seconds hand Crown Positions: Position 1 - Normal position Crown pushed against case Date Display Position 2 - To set TIME: Rotate crown in either direction Time setting Pull crown to position 2. To set time rotate crown in either direction. Date setting Pull crown to position 1. To set date rotate crown in either direction.
oPeRaTInG InsTRUCTIons Digital models Models Convertible bracelet/strap Converting Bracelet to Strap B - MODE 2 A - SET 1 Time setting Press A key twice to entry Time Setting mode ,select item in turn as 4 3 following: Month / Day / Hour / Minute Press B key to adjust the flashing item. Press A key to confirm.
Multi-eye Mode oPeRaTInG InsTRUCTIons Multi-eye Models Day hand Day hand Crown Date hand Second hand Date hand Crown Day counter 1 2 3 24-Hour time hand Second hand Multi-eye watches are powered by multi-function movements that enable them to report such information as month, weekday and date via apertures or “eyes” in the dial Date counter 1 2 3 24-Hour time hand 24 hours counter Time setting Multi-eye watches are powered by multi-function movements that enable them to report such information as
oPeRaTInG InsTRUCTIons Digital models Models Convertible bracelet/strap Converting Bracelet to Strap Light /Reset (A Key) (D Key) Start/stop 2 Mode (B Key) (C Key) Set Time setting 1 Alarm and Chime ON/OFF: 4 At Alarm original state, press A key to be ON/OFF ). Alarm ( ) and Chime ( When Alarm Time over, alert sounding and indicator ( ) flashing for about 20s. 1. Real Time 3 At any mode, press A key to EL back bright.
