Operating instructions
11
OPERATING INSTRUCTIONS
Your watch features a dual-time dial with 24-hour GMT hand that
allows you to monitor the time in a second time zone anywhere in
the world.
Reading the Watch:
In this illustration: The current time in the first time zone is
10:10’32” (10:10 PM) as indicated by the Hour and Minute hands
on the outer 12-hour ring. The current time in the second time
zone is 11:10’32” (11:10 AM) as indicated by the GMT hand on the
inner 24-hour ring.
NOTES: The Minute and Seconds hands are the same for both
time zones.
The Date is synchronized with the time in the first time zone.
ALWAYS set/adjust the 24-hour GMT hand (second time zone)
first, then set the time in the first time zone.
To set 24-Hour GMT Hand (second time zone):
1. When Seconds hand reaches 12 o’clock, pull crown out to
Position 3.
2. Rotate crown in either direction until 24-hour GMT hand and
Minute hand indicate desired time in second time zone.
3. When adjusting the Minute hand, move it approximately
10 minutes past the desired time, then move it back to the
desired position to ensure accurate time adjustment. This step
synchronizes the regular Hour (first time zone) hand.
4. Take an accurate time signal (from a radio news station, for
example). As soon as audible tone signals exact time, push
crown back in to position 1.
To set Time (first time zone):
1. Pull crown out to Position 2.
2. Rotate crown clockwise to set Hour hand to desired time: It will
advance in 30-minute leaps for quick adjustment.
3. Push crown back in to Position 1.
Dual-Time GMT Models
GMTGMT
G
123
NOTES: Setting the Hour hand on the exact hour provides the
most accurate time setting. If the Hour hand is set between hours,
it may prevent the time from being accurately displayed and read.
The Date is synchronized with this Hour hand; be sure to take
AM/PM time into account when adjusting it.
To set Date:
The Date is synchronized with the time in the first time zone.
1. Pull crown out to Position 2.
2. Rotate crown counterclockwise to adjust Date.
3. Push crown back in to Position 1.
NOTE: If the Date is set between 9:00 PM and 1:00 AM, the date
may not change on the following day.
Minute hand
Date display
Crown
GMT Hand
Seconds hand
Hour hand