Operating instructions

20
OPERATING INSTRUCTIONS
Certain bracelet watches feature bar-shaped connecting links
that function like jewelry clasps, allowing you to achieve a quick,
custom fit.
TIPS: We recommend that you adjust one side of the bracelet at a
time.
To ensure that the watch will sit properly on the wrist, it is best to
remove/add an equal number of links on each side. If you must
remove an odd number, take the extra link from the 6 o’clock side.
To remove links:
1. Hold one side of watch bracelet as shown, with a regular link
grasped between the thumb and index finger of each hand, and
one bar clasp link between them.
2. Gently twist your hands in opposite directions to “pop” the bar
clasp link open.
3. Repeat steps 1 and 2 further along length of bracelet, to remove
the desired number of links.
To reattach links:
1. Line up the two lengths of bracelet you wish to reconnect side
by side, face up.
2. Use an open bar clasp link to rejoin them: Once the bar link is
in proper position, squeeze it together between your fingers
until you feel it snap closed, locking the bracelet sections back
together.
Repeat process above to remove and reattach links on other side
of bracelet.
Removable Links
REGULAR
BRACELET LINK
BAR CLASP
LINK
20
OPERATING INSTRUCTIONS
Certain bracelet watches feature bar-shaped connecting links
that function like jewelry clasps, allowing you to achieve a quick,
custom fit.
TIPS: We recommend that you adjust one side of the bracelet at a
time.
To ensure that the watch will sit properly on the wrist, it is best to
remove/add an equal number of links on each side. If you must
remove an odd number, take the extra link from the 6 o’clock side.
To remove links:
1. Hold one side of watch bracelet as shown, with a regular link
grasped between the thumb and index finger of each hand, and
one bar clasp link between them.
2. Gently twist your hands in opposite directions to “pop” the bar
clasp link open.
3. Repeat steps 1 and 2 further along length of bracelet, to remove
the desired number of links.
To reattach links:
1. Line up the two lengths of bracelet you wish to reconnect side
by side, face up.
2. Use an open bar clasp link to rejoin them: Once the bar link is
in proper position, squeeze it together between your fingers
until you feel it snap closed, locking the bracelet sections back
together.
Repeat process above to remove and reattach links on other side
of bracelet.
Removable Links
REGULAR
BRACELET LINK
BAR CLASP
LINK
Regatta Chronograph
20
7
2
0
I2
8
3
5
WATER RESISTANT
10 ATM
Y
A
C
H
T
I
N
G
T
I
M
E
R
3
4
6
M
I
N
.
5
M
I
N
.
1
M
I
N
U
T
E
60
30
2040
1050
8
40 20
60
0
6
12
18
2
4
H
O
U
R
S
5
5
0
5
1
0
5
0
4
5
3
5
2
5
1
5
1
0
M
I
N
.
6
8
Seconds hand
Central hand
To display:
•count down
minutes
•race timing
minutes
Push button A
•START/STOP
Push button B
•Reset
•Count down
timer setting
•Second chance
count down
adjustment
•Select the
display of
hours/seconds
counted at the
10H counter
Alarm hand
Minute hand
Important: The measurement of time starts
by the count down, then followed by the race timing.
Hour/seconds
counter
To display:
•count down
seconds
•race timing
hours
Push button C
•alarm
ON/OFF