User manual

Getting Started
This BOSSCOM DAB/FM tuner has been designed for operation in a Bang & Olufsen remote control system allowing
f
ull control with a Bang & Olufsen remote control terminal either directly or via connection to Bang & Olufsen
equipment.
Thus the tuner is Beolink compatible.
Direct Mode or CableLink Mode
The BOSSCOM DAB/FM tuner is connected to Bang & Olufsen equipment via the 7-pin DIN cable with or without
a
daptor, and through option programming it may be controlled as follows:
1. Via the tuner’s built in IR-receiver, ”Direct Mode”
Direct Mode is used when connection to an input with control data is not possible.
2. Via the cable connected Bang & Olufsen equipment, ”CableLink Mode”
CableLink Mode is used only when connection to an input with control data is possible.
See page 8 for Option Programming.
Factory Settings
The factory setting is for “Direct Mode” and manual power control.
T
he factory setting for input socket and selected source is:
Remote control Source
Beo4, Beo5 or Beo6 N
.MUSIC, A.MEM2 or TAPE2
Beolink 1000
SHIFT A.TAPE
I
f the DAB/FM tuner is connected to a different input, the option should be programmed accordingly.
See page 8 for Option Programming
®Powmascables
®Powmascables