BOSSCOM DAB/Internet Radio DAB+/FM/ Internet Radio & Media Player Modified for use with B&O remotes only Installation Manual
Getting Started 3 Direct Control or CableLink Control ............................................................ 3 Connection to Bang & Olufsen Equipment 3 Set Up for Direct Control ............................................................................ 5 Set Up for CableLink Control ....................................................................... 5 Option Programming – fit the tuner to the B&O set up 6 Setup wizard 7 Access Wireless Network ..........................................
Connection via a BeoLink Active in any Link Room 20 Connection to a 21 Pin AV Socket on any Bang & Olufsen TV. 21 Setup the Media Player 22 Windows Media Player 11 Shared Media Set Up ..................................... 22 Setup Media Sharing in the MAC OS......................................................... 23 Troubleshooting www.Bosscom.
Getting Started This Bosscom DAB+/FM/WiFi tuner has been re-designed for operation in a Bang & Olufsen remote control system, allowing full control with a Bang & Olufsen remote control terminal either directly or via connection to Bang & Olufsen equipment. Thus the tuner is BeoLink compatible. If the Bang & Olufsen system comprises one or more link rooms in a BeoLink System, sound may be distributed to these rooms, and in some cases – see below – the tuner might even be controlled from there.
This BOSSCOM DAB/Internet Radio tuner may be connected to any Bang & Olufsen BeoSound, BeoCenter, BeoMaster, BeoSystem or BeoVision TV and controlled with a Bang & Olufsen remote control terminal. It may also be connected to equipment of any other brand, but it still needs to be controlled with a Bang & Olufsen remote control terminal. Through the years Bang & Olufsen equipment has had input sockets added, removed and renamed. A newer Bang & Olufsen remote control has the button N.
Set Up for Direct Control The Bang & Olufsen remote terminal controls both the BOSSCOM DAB/Internet Radio tuner and the Bang & Olufsen audio equipment. When selecting the tuner connected source with the Bang & Olufsen remote the corresponding input socket is opened, and the tuner is turned on simultaneously. The tuner can be listened to in any connected link room, but not controlled from there.
Option Programming – fit the tuner to the B&O set up Option programming is only required for the initial installation of the tuner. The programming itself is carried out with a Bang & Olufsen remote, pointing directly towards the tuner. The tuner does not need to be connected to a Bang & Olufsen device, in order to be Option programmed. The objective is to fit the tuner’s performance to the actual audio set up.
Setup wizard When the tuner is turned on initially, “Setup wizard” is being displayed after a few seconds. The Setup Wizard is a guide through the basic set up of the tuner. Prior to the initial power up the tuner should be connected to the Bang & Olufsen equipment and programmed correctly. See the chapter about Option programming. With the Factory set option: The tuner will power on, when or is pressed, on a Bang & Olufsen remote control, pointed directly at the tuner.
With an encrypted network the required password has to be entered via the displayed entry screen. Use to move the cursor to the desired character and select by pressing . display pressing WEP/WPA passwords are case sensitive! The entered password is stored permanently, and no re-entry is required. The correct password has been entered. Press to exit the setup wizard. Access Wireless Network With the Setup Wizard completed select Station list and press .
Connecting to a Wired Network Connect LAN cable to the tuner’s LAN socket. Open Main Menu by pressing Move cursor to System settings and select by pressing . . Select Network and confirm by pressing . Move cursor to Manual settings and confirm by pressing . Select Wired and then DHCP enable and confirm by pressing . Connection of the tuner to the wired LAN has been completed. Shift to Wireless Network Refer to above display Connection type Select Wireless by pressing Select DHCP enable by pressing .
Access Code With the tuner connected to a network an access code and FAQ may be displayed. Select Internet Radio and then Help Select Access code and confirm by pressing . The tuner’s ID is then displayed. Select FAQ and confirm by pressing . Start the Setup Wizard Point at System settings and select Setup wizard by pressing . To re-start the tuner select YES and confirm by pressing . View SW Version and Tuner ID Point at System settings then Info and select by pressing .
Connection to Bang & Olufsen Equipment This BOSSCOM DAB/Internet Radio tuner may be connected to any Bang & Olufsen BeoSound, BeoCenter, BeoMaster, BeoSystem or BeoVision TV and controlled with a Bang & Olufsen remote control terminal, but it may also be connected to equipment of any other brand and still be controlled with the Bang & Olufsen remote control terminal. Below tables are showing available input sockets and their designation on various Bang & Olufsen equipment.
Antenna Connection The BOSSCOM DAB/Internet Radio tuner may be connected to any antenna picking up the FM and the DAB frequencies. If the FM signal strength is not sufficient the reception will be noisy. If the DAB signal strength is not sufficient the reception is varying from disturbing ”bubbles” to complete quietness. The supplied ‘antenna’ is only sufficient when the tuner is situated in a location, close to the FM or DAB transmitter.
Source & Option Selection The following tables show the available input sockets in various Bang & Olufsen audio and video products, how to select them using a remote control terminal and what the corresponding option program of the BOSSCOM DAB/Internet Radio tuner should be. The BOSSCOM DAB/Internet Radio tuner has to be programmed with the right option, to operate in the B&O environment that it is situated.
Input Socket BeoSound 4 Direct Option CableLink Option Remarks AUX 100 - The input is RCA phono sockets. Use a Bosscom adaptor cable, type 39207438. MasterLink - 410 If the MasterLink socket is not used, the DabWiFI2 tuner might be connected and operated via a BeoLink Converter. Input Socket BeoSound 1 Source Selected 416 - 412 Direct Optio n CableLin k Option AUX 100 - AUX 102 - Input Socket BeoSound Century www.Bosscom.
Input Socket BeoSound 9000 Direct Option CableLink Option AUX 100 - AUX 102 - Input Socket CableLink Option AUX 100 - AUX 102 - AUX 103 - AUX 106 - Direct Option CableLink Option Remarks AUX 103 302 In the CableLink mode numeric commands are not accepted. AUX 106 206 In the CableLink mode numeric commands are not accepted. AUX 100 - In the CableLink mode numeric commands are not accepted.
Input Socket BeoSystem 2500 BeoCenter 2500 BeoCenter 2300 BeoMaster 3300 Source Selected Direct Option CableLink Option Remarks AUX 100 - In the CableLink mode numeric commands are not accepted. AUX 103 302 In the CableLink mode numeric commands are not accepted. AUX 106 206 In the CableLink mode numeric commands are not accepted.
Input Socket Source Selected BeoMaster 3500 BeoMaster 4500 BeoMaster 6500 BeoMaster 7000 BeoCenter 8000 BeoCenter 8500 BeoCenter 9000 BeoCenter 9500 www.Bosscom.com CableLink Option 302 Remarks TP1 Direct Option 102 CD 104 204 TP2 103 302 In the CableLink mode numeric commands are not accepted. In the CableLink mode numeric commands are not accepted. PHONO 106 206 In the CableLink mode numeric commands are not accepted.
BeoCenter 9300 Input Socket Source Selected Direct Option CableLink Option Remarks PHONO 106 206 In the CableLink mode numeric commands are not accepted. TAPE2 103 302 In the CableLink mode numeric commands are not accepted. AUX 100 - Direct Option CableLink Option Remarks AV1 AV2 AV3 - 410 414 412 The input is a scart socket, 21 pin AV socket. Use a Bosscom adaptor cable, type 39207496. AV4 AV5 AV6 - 410 414 412 The input is RCA phono sockets.
Connection via a BeoLink Converter 1611/ 1612. The BOSSCOM DAB/Internet Radio tuner may be connected to a Bang & Olufsen stand-alone audio or video master, TV, via a BeoLink Converter using MasterLink and the AAL inputs. Connected to an audio master and programmed as a ”video source” the DabWiFI2 may be selected as that, VMEM as an example. Connected to a video master and programmed as an “audio source” the DabWiFI2 may be selected as that, ATAPE as an example.
Connection via a BeoLink Active in any Link Room The BOSSCOM DAB/Internet Radio tuner may be connected to a Bang & Olufsen BeoLink Active with a vacant ‘PC’ socket. Thus active speakers in any link room allow for the installation of the DabWiFI2 tuner and the opportunity of having a local radio source controlled directly with the Bang & Olufsen remote control terminal. Input Socket BeoLink Active PC www.Bosscom.
Connection to a 21 Pin AV Socket on any Bang & Olufsen TV. Input Socket All B&O TV models BeoVision 10 BeoVision 8 BeoVision 7 BeoVision 6 BeoVision 4 BeoVision 3 BeoVision 1 BeoSystem 3 Avant models LX models LE models LS models L models MX models ME models Scart Source Selected Direct Option CableLink Option 110 410 110 410 116 416 AV1 - AV6 NOT the DECODER input!! www.Bosscom.com 112 412 114 414 Remarks The input is a scart socket, a 21 pin AV socket.
Setup the Media Player Windows Media Player 11 Shared Media Set Up With the Windows Media Player 11 installed and the tuner connected to the network sharing music may be established. The tuner is now able to play the music that is stored on the PC. The music sharing set up: Open the Windows Media Player and click on the little arrow below Library. Then click on Media Sharing. In the Media Sharing dialog box select the Share my Media check box.
Setup Media Sharing in the MAC OS Using the tuner with a MAC requires Windows File Sharing software. MAC OS 9 and earlier versions of the OS require extra software to use Windows File Sharing, but MAC OS X 10.2 and later versions have Windows File Sharing built into the OS already. Setting Up Windows File Sharing on a MAC From the 'Dock' click on 'System Preferences'. From the 'System Preferences' window under the 'Internet &Network' section, click on 'Sharing'.
Troubleshooting If experiencing trouble with the tuner visit the help section on : www.wifiRadio-frontier.com. If experiencing trouble connection to a wireless network the following steps might resolve the problem: 1. Check that a WiFi connected PC can access the Internet using the same network. 2. Check that a DHCP server is available or that a static IP address has been configured on the tuner.
DabWiFi2 is equipped with a 7 pin DIN DataLink cable for connection to Bang & Olufsen equipment. Thus an adaptor cable is required for connection to equipment not having a DIN input socket. See below examples and the Option Programming section in the installation manual. www.Bosscom.