BOSST60 User Manual BOSST60 User Manual 1/1
BOSST60 User Manual 1. BOSST60 Features................................................................................................... 4 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Appearance ....................................................................................................................... 4 Interface ............................................................................................................................. 4 Software..........................................................
BOSST60 User Manual 4.2 4.3 4.4 4.5 5 6 Global Command............................................................................................................ 37 Tree Structure ................................................................................................................. 38 Network Diagnosis ......................................................................................................... 47 Restore to factory default .........................................................
BOSST60 User Manual 1. BOSST60 Features 1.1 Appearance 1.2 Interface Power: WAN: LAN: 1.3 Output Power:12VDC,500mA. RJ45 port. RJ45 port. Software Support two sip accounts at the same time. Redundancies server support. NAT, Firewall. DHCP client and server. Support PPPoE, (used for ADSL, cable modem connecting). Support major G7.xxx CODEC. VAD,CNG.
BOSST60 User Manual G.168 compliant 32ms echo cancellation Tone generation and Local DTMF re-generation according with ITU-T E.164 dial plan and customized dial rules Hotline. Speed Dial Call Forward, Call Transfer, 3-way conference calls Record Caller ID display DND(Do Not Disturb),Black List,Limit List Upgrade firmware through FTP, TFTP or HTTP,. Web management. Telnet remote management. adjustable user password and super password 1.4 Standard and Protocols IEEE 802.3 /802.
BOSST60 User Manual 1.
BOSST60 User Manual 1.8 Installation Use ethernet cable to connect BOSST60’s LAN port and your computer. Set your computer’s ip to the network 192.168.10.x or using dynamic obtain IP. Open your web browser and key in 192.168.10.1. Then you will see the logon page of BOSST60, the default username and password is admin/admin for administrator and guest/guest for guest.
BOSST60 User Manual 2. Web Configuration 2.1 Access Web setting page Enter BOSST60 IP address in the web browser and press ENTER to go to the log on page, and key in the username and password to access BOSST60 setting page.
BOSST60 User Manual 2.2 Current state This page shows BOSST60’s running state. Network shows the WAN and LAN port connecting state and current settings. VoIP part show the working state of VoIP, you can see whether BOSST60 has registered the public sip server or H323 server. Phone Number shows the H323, public sip and private sip phone numbers.
BOSST60 User Manual 2.3 Network 2.3.1 Wan Config WAN port network setting page. Support static IP, dynamic obtain IP and PPPoE.
BOSST60 User Manual 2.3.2 LAN Config Bridge Mode: Enable this option to switch to bridge mode. IP phone won’t assign IP for its LAN port in bridge mode and its LAN and WAN port will be in the same network. (This setting won’t take effect unless you save the config and reboot the device) IP,Netmask: Set the IP and Netmask for the LAN DHCP Server: Enable DHCP service in LAN port NAT: Enable NAT. Highest Priority of Voice Quality: Enable this option to guarantee voice quality.
BOSST60 User Manual 2.4 2.4.1 VoIP SIP Config Setting page of public SIP server: Register Server Addr: Register address of public SIP server Register Server Port: Register port of public SIP server Register Username: Username of your SIP account (Always the same as the phone number) Register Password: Password of your SIP account.
BOSST60 User Manual RFC Protocol Edition: Current BOSST60 SIP version. Set to RFC 2543 if the gate need to communicate to devices (such as CISCO5300) using the SIP 1.0. Default is RFC 3261. Enable Register: Enable/Disable SIP register. BOSST60 won’t sent register info to SIP server if disable register. DTMF Mode: DTMF signal sending mode: support RFC2833, DTMF_RELAY (inband audio) and SIP info Auto Detect server: co-work with Server Auto Swap and Detect Interval Time.
BOSST60 User Manual 2.5 Advance 2.5.1 DHCP Server DHCP server manage page. User may trace and modify DHCP server information in this page. DNS Relay: enable DNS relay function. User may use below setting to add a new lease table. Lease Table Name: Lease table name. Lease Time: DHCP server lease time. Start IP: Start IP of lease table. End IP: End IP of lease table. Network device connecting to the BOSST60 LAN port can dynamic obtain the IP in the range between start IP and end IP.
BOSST60 User Manual 2.5.2 NAT Advance NAT setting. Maximum 10 items for TCP and UDP port mapping. H323 ALG: IPSec ALG: FTP ALG: PPTP ALG: Enable/Disable H323 ALG; Enable/Disable IPSec ALG; Enable/Disable FTP ALG; Enable/Disable PPTP ALG; Transfer Type: Inside IP: Inside Port: Outside Port: Transfer type using port mapping. LAN device IP for port mapping. LAN device port for port mapping. WAN port for port mapping. Click Add to add new port mapping item and Delete to delete current port mapping item.
BOSST60 User Manual 2.5.3 Net Service HTTP Port: configure HTTP transfer port, default is 80.User may change this port to enhance system’s security. When this port is changed, please use http://xxx.xxx.xxx.xxx:xxxx/ to reconnect. Telnet Port: configure telnet transfer port, default is 23. RTP Initial Port: RTP initial port. RTP Port Quantity: Maximum RTP port quantity, default is 200 Notice: Settings in this page won’t take effect unless save and reboot the device.
BOSST60 User Manual 2.5.4 Firewall settings Firewall setting page. User may set up firewall to prevent unauthorized Internet users from accessing private networks connected to the Internet (input rule), or prevent unauthorized private network devices to access the internet. Access list support two type limits: input_access limit or output_access limit. Each type support 10 items maximum. BOSST60 firewall filter is base WAN port.
BOSST60 User Manual Des Mask: Destination address mask. Indicate the source is dedicate IP if set to 255.255.255.255.
BOSST60 User Manual 2.5.5 QoS settings BOSST60 IP phone implement QoS based on 802.1p, The QoS is used to mark the network communication priority in the data link/MAC sub-layer. BOSST60 will sorted the packets using the QoS and sends it to the destination. QoS Enable: Enable QoS service. QoS Table Include: enable include QoS table, BOSST60 will only provide QoS service to the network address included in the QoS table. Disable the option.
BOSST60 User Manual 2.5.6 Advance SIP settings This page is used to set the private sip server, stun server, and back up sip server information. STUN Server setting: STUN Server Addr: STUN Server Port: STUN Effect Time: Enable SIP STUN: configure stun server address; configure stun server port default 3478 stun detect NAT type circle, unit: minute. enable/disable stun.
BOSST60 User Manual User can register two sip servers: public sip server and private sip server.these two sip servers are independent from each other and running in the same time. For how to configure private sip server.
BOSST60 User Manual 2.5.7 Digital Map Digit map is a set of rules to determine when the user has finished dialing. BOSST60 support below digital map: Digital Map is based on some rules to judge when user end their dialing and send the number to the server. BOSST60 support following digital map: ----End With “#”: Use # as the end of dialing. ----Fixed Length: When the length of the dialing match, the call will be sent. ----Timeout: Specify the timeout of the last dial digit.
BOSST60 User Manual 2.5.8 Call Service Settings User configure the value add service such as hotline, call forward, call transfer, 3-way conference call .etc in this page Hotline: configure hotline number. BOSST60 immediately dials this number after hook-off if it is set. Call Forward: Please refer to Value_add_service for detail. No Disturb: DND, do not disturb, enable this option to refuse any calls. Ban Outgoing: Enable this to ban outgoing calls.
BOSST60 User Manual No Answer Time: no answer call forward time setting. Auto Answer: Enable/disable auto answer function. Enable Voice Record: Enable/disable answering machine function. Please refer to Record Function for detail. User-defined Voice: Use customized greeting message. Incoming Record Playing: simultaneously play the message when recording. Black List: incoming call in these phone numbers will be refused.
BOSST60 User Manual 2.5.9 MMI Filter MMI filter is used to make access limit to BOSST60 IP phone. When MMI filter is enable. Only IP address within the start IP and end IP can access BOSST60 IP phone.
BOSST60 User Manual 2.5.10 Audio Settings CODEC: select the prefer CODEC; support ulaw, alaw,G729 and G7231 5.3/6.3 Signal Standard: Signal standard for different area. Input Volume: Handset in volume. Output Volume: Handset out volume. Handfree Volume: Hand free volume Handdown Time: hand down detect time.
BOSST60 User Manual 2.6 Dial-Peer Settings Please refer to How to use dial rule for detail.
BOSST60 User Manual 2.7 Config Manage Save Config: save current settings. Clear Config: restore to default settings. Notice: clear config in admin mode, all settings restores to factory default; clear config in guest modem, all settings except H323, sip, advance sip restore to factory default.
BOSST60 User Manual 2.8 Update Web Update: Update IP phone’s settings or firmware. Firmware file is .z extension when configure file is .cfg extension, BOSST60 will auto select configure update or firmware update according the extension. TFTP/FTP Update: upload/download the configure file with FTP or TFTP server. or download firmware from FTP or TFTP server Back up configure file to your FTP/TFTP server. * configure use .cfg extension. Auto update: BOSST60 IP phone support FTP and TFTP auto update.
BOSST60 User Manual Gateway original version is: <>Version:1.0000 ConfFile Version：6 User may edit the configure file version to: <>Version:1.
BOSST60 User Manual 2.9 System Manage 2.9.1 Account Manage Set web access account or keypad password of BOSST60. 2.9.2 Phone Book: User may set contacts in this page, and the contacts will be saved in the memory. Then using the Pbook, Vol+,Vol-,Menu/OK and Exit keys to choose your friend in the contacts and then press # to call out. 2.9.3 Syslog Config: 2.9.4 Time Set: 2.9.5 Reboot: Reboot IP phone, some setting needs to reboot to make it works.
BOSST60 User Manual Use keypad configure BOSST60 IP phone 3 3.1 Keypad function User can configure BOSST60 through its keypad.
BOSST60 User Manual 3.2 Keypad Menu User may use SET, Menu/ok, Exit, Vol+, Vol- to config BOSST60 detail setting. Press Menu/ok to enter config mode, and the default password is 123. Below list the keypad menu of BOSST60 Level 1 Network Call Feature BOSST60 Keypad Menu Level 2 Level 3 Level 4 LAN IP Netmask DHCP Server NAT Switch FTPalg IPSec alg PPTPalg WAN Status Static Net 1. IP 2. NetMask 3. Gateway 4. DNS 5.
BOSST60 User Manual H.
BOSST60 User Manual Input-volume Output-Volume Other Setting Syslog 4. System 1. Save 2. Reboot 3.
BOSST60 User Manual 4 Telnet Console 4.1 Introduce 4.1.1 Basic structure User may use telnet command to access and manage IP phone. BOSST60 adopts tree structure for telnet. Every node contains its sub-nodes or local command. User can type “help” or “?” whenever to see sub-nodes and all local command under current node. Besides local command, there are some global commands can be used in each node. 4.1.2 Basic command Logout: exit telnet mode. Write: save current settings.
BOSST60 User Manual 4.
BOSST60 User Manual 4.3 Tree Structure 4.3.1 account path: # [stop]start Syslog ---syslog [no] start Configure Syslog server address and port ---syslog server –ip x.x.x.x _port xxx Example: ##server –ip 202.112.20.10 Show syslog settings ---syslog show Show all account settings ---show 4.3.2 config accesslist firewall config path: # add firewall rule ---entry –I/O xxx –P/D xxx –proto xxx –srcaddr x.x.x.x –srcmask x.x.x.x–desaddr x.x.x.x –desmask x.x.x.
BOSST60 User Manual Show current DHCP rules ---dhcpshow Show LAN port IP address ---ipshow Show NAT info ---natshow Change LAN port IP address ---ip –addr x.x.x.x –mask x.x.x.x Example:#ip –addr 192.168.1.10 –mask 255.255.255.0 WAN interface settings path: # [disable]enable dhcp client ---[no]dhcp [disable]enable pppoe ---[no]pppoe [disable]enable QOS ---[no]qos Set default gateway IP ---gateway x.x.x.
BOSST60 User Manual Show http access setting ---http-port Set telnet access port ---telnet-port xxx Show telnet access port ---telnet-port Set RTP initial port and quantity ---media-port –startport xxx –number xxxx Example:#media-port –startport 10000 –number 200 Add route rule ---route –gateway x.x.x.x –addr x.x.x.x –mask x.x.x.x Example:Arcihfone#route –gateway 202.112.10.1 –addr 202.112.210.1 –mask 255.255.255.0 Delete route rule ---no route –gateway x.x.x.
BOSST60 User Manual 5060 –protocol sip Disable call forward ---no callforward [disable]enable call transfer ---[no]calltransfer [disable]enable call waiting ---[no]callwaiting Set prefer codec ---codec xxx Set DTMF gain ---dtmfvolume xxx Set black list ---in-limit xxx Show black list ---in-limit Set input volume ---input xxx Set outgoing limit list ---out-limit xxx Show outgoing limit list ---out-limit Set output volume ---output xxx [disable]enable outgoing limit ---[no]shutdown out [disable]enable black
BOSST60 User Manual _password xxx Set alter server info _password xxx [disable]enable stun server Set stun detecting interval time Set stun server ip and port Show current sip info ---alter-server register –ip x.x.x.x _port xxx _user xxx ---stun [no]enable ---stun interval-time xxx ---stun –ip x.x.x.x –port xxx ---show User management path: # Change user right.
BOSST60 User Manual 4.3.3 Debug (Level 0~7) path: # show debug setting [disable]enable debug all modules [disable]enable debug app module [disable]enable debug cdr module [disable]enable debug sip module [disable]enable debug h323 module [disable]enable debug tel module [disable]enable debug dsp module ---show ---[no] all xxx ---[no] app xxx ---[no] cdr xxx ---[no] sip xxx ---[no] h323 xxx ---[no] tel xxx ---[no] dsp xxx 4.3.4 download configure to flash usage: #download tftp –ip x.x.x.
BOSST60 User Manual dhcp-server path: # show LAN status and DHCP server info Example:## dhcp-server dial-rule path: # show digital-map info Example:## dial-rule interface path: # show LAN info Example:##interface fastethernet lan show WAN info Example:##interface fastethernet wan ip path: # show arp table info Example:##ip arp Show DNS server info Example:##ip dns Show netstate info Example:##ip netstat Show route info Example:##ip rou
BOSST60 User Manual nat path: # show NAT information Example:##nat port path: # show caller-ID info Example:##port callerID show dsp info Example:##port dsp show hotline info Example:##port hotline show black list info Example:##port in-limit show outgoing limit info Example:##port out-limit show current phone number Example:##port number show current port status Example:##port status PPPoE path: # show PPPoE info Example:## pppoe qos
BOSST60 User Manual version path: # show IP phone version Example:## version 4.3.8 telnet and logout Usage: #telnet –target -port Login:xxx Password:xxx # #logout 4.3.9 timesettings path:
BOSST60 User Manual 4.4 Network Diagnosis There are some telnet commands for checking your network. Now Listing below for your information Command ping tracert show basic show ip route show ip arp show ip netstat telnet 4.5 Function Check if the destination is accessible Show network path info Show network settings Show route table Show arp table Netstat programe Telnet to another device Example #ping www.google.com #tracert www.google.
BOSST60 User Manual 5 POST Mode(safe mode) BOSST60 provide safe mode. When there is booting problem because of setting problem or firmware problem. User can restore the factory setting or upgrade to a new firmware to solve this problem. How to enter safe mode? There will be a schedule bar in the BOSST60 booting procedure, press # key within the first 5 seconds, then the phone will go to POST mode. It has a default ip 192.168.10.1 in POST mode. User may change the PC’s IP address to 192.168.10.
BOSST60 User Manual 6 FAQ 6.1 How many servers may BOSST60 register simultaneously? BOSST60 is able to register two SIP servers simultaneously, and redundancy servers. User can configure the dial peer to route calls between these servers. Please refer “How to use the dial rule?” for detail. 6.2 Why the settings vanish after reboot? Please go to Config Manage Save Config to save your setting always. 6.
BOSST60 User Manual 2T rule: If the call starts with 2, the first 2 will be deleted, and the rest number will be sent to private SIP server. 3T rule: If the call starts with 3, the first 3 will be deleted, and the rest number with be sent to public SIP server. 123 rule: Dial 123 and will send 8675583018049 to your server. Used as speed dial function. 0T rule: If the calls is begin with 0, the first 0 will be replace by 86.
BOSST60 User Manual Call Forward: ----Forward when busy: select Busy in the Call Forward Field, and Key in the destination phone number in the Forward Number. If some one calls you when you having a call, the caller will be forwarded to the destination number. ----Forward no answer: Select No Answer in the Call Forward Field, and Key in the destination phone number in the Forward Number, fill the time in the No Answer Time.
BOSST60 User Manual 6.7 How to use the record function? BOSST60 provides record function. With this function, user may record three VoIP message and one local message. Active answering machine: Select “Enable Voice Record” to active answering machine, and config No Answer Time. If there is an incoming call and no one answer the call. After timeout, BOSST60 will auto answer this call and ask the caller to leave message. Incoming Record Playing: play the message when recording.
BOSST60 User Manual 6.8 How to use set the IP type via keypad? In the idle mode, user may us the keypad to set the IP type as the below procedure: Keep pressing the button 1 for changing to static mode. Keep pressing the button 2 for changing to DHCP mode. Keep pressing the button 3 for changing to PPPoE mode.
