User Manual

Specications IS Type-S
"1Nominal Size
RMS Power Handling 40 watts
Peak Power Handling 100 watts
Nominal Impedance 8 ohms
Frequency Response 8kHz–22kHz (+/- 3dB)
)retem1 @ ttaw1( Bd09Sensitivity
ytitnauQnoitpircseD#
1 Type-S1 1" Kortec® Dome Tweeter 2
2 IS Type-S Crossover 2
2Tweeter Grille3
4 Tweeter Flush-Mount 2
5 Tweeter Angle-Mount (top) 2
6 Tweeter Angle-Mount (bottom) 2
not shown
Tweeter Hardware Pack 2
4Spring Clips7
8 Terminated Tweeter Wire 2
9
#
8 x ⁄" Pan Head Screw 2
10
#
8 x ½" Self-Tapping Screw 4
11
#
8 x 1" Self-Tapping Screw 8
12
#
6 x ⁄" Silver Socket Head Screw 4
13 1Hex Key
6¾"
169mm
3⁄"
85mm
1⁄"
36mm
IS
ts
performance imaging system
2⁄"
51mm
2⁄"
52mm
1½"
38mm
1⁄"
27mm
¾"
18mm
1⁄"
43mm
142-003740-0
Boston Acoustics, Inc. 300 Jubilee Drive, Peabody, MA 01960 USA
T: 978.538.5000 F: 978.538.5100 W: bostonacoustics.com
Boston, Boston Acoustics, and the B/A ellipse symbol are registered trademarks of
Boston Acoustics, Inc. Specications are subject to change without notice.
© 2009 Boston Acoustics, Inc. All Rights reserved. Covered by patents issued and or pending.