PV1000 PowerVent® Powered Subwoofer
Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Regulatory Compliance Statements Canadian Users: American Users: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
volende noem(en) of richtlijn(en) beantwoordt: a cui si riferisce questa dichiarazione è conforme alla/e sehuente/i norma/o documento/i normativo/i: European Users: This equipment has been tested and found to comply with the following European directive: (i) EMC Directive 89/336/EEC amending directive 92/31/EEC 93/68 EEC as per EN 50081-1: 1992 according to EN55013: 1990 Class B EN50082-1: 1997 according to EN61000-4-2: 1995 EN61000-4-3: 1997 EN61000-4-4: 1995 (ii) Low Voltage Directive (Safety) 72/23/EEC
Specifications Frequency Response (±3dB) 22–150Hz Subwoofer Amplifier Power 1000 watts continuous, 4Ω <0.
Connecting the PV1000 to Digital 5.1 Channel Home Theater Systems NOTE: Power is always supplied to the subwoofer electronics unless it is unplugged. Make sure your subwoofer and receiver are unplugged when making the connections. Digital 5.1 home theater electronics dedicates one channel (the “.1” of 5.1) to reproduce the special low-frequency (LFE) information (such as explosions and thunder) contained in digitallyencoded soundtracks. Select subwoofer-yes from your receiver’s set-up menu.
Connecting the PV1000 to Dolby® Pro Logic® Systems For Dolby Pro Logic systems, check to see what kind of line level output your receiver or processor has. Most Pro Logic systems have a single sub out connection. Set the Center Channel Mode on the receiver to Normal. This diverts any bass in the center channel to the subwoofer, resulting in maximum system bass output. Line in Line out L / mono 115V 60Hz 7.
Setting the Crossover Control As a starting point, set the crossover control on the PV1000 about 10Hz higher than the lower limit of your main speakers’ bass response. Fine-tune the crossover setting by ear for the smoothest blend with your main speakers. The best setting of the crossover control will depend on speaker placement and personal preference.
Controls Front Panel Volume: Adjusts the sound level of the subwoofer. A typical setting is around 10 o’clock. Crossover (Hz): Adjusts the frequency of the low-pass filter for the subwoofer. Crossover Set/None: Engages or bypasses the PV1000’s built-in low-pass filter. Polarity (0° or 180°): Selects regular (0°) or inverted (180°) polarity for the subwoofer. Set this switch to provide the fullest, most dynamic bass.
Placement Place the subwoofer next to a wall or in a corner near your main speakers. Typically, the sound is best when the subwoofer is within 15 feet (5m) of the main speakers. However, the sharp 24dB/octave crossover roll-off permits placement farther from the main speakers if necessary. Since the ear is unable to localize the low frequencies of the subwoofer, the bass still appears to come from the main speakers. In most cases, the subwoofer may be placed anywhere in the listening room.
Limited Warranty For one year from the date of purchase, Boston Acoustics will repair for the original owner any defect in materials or workmanship that occurs in normal use of the subwoofer, without charge for parts and labor. Your responsibilities are to use the system according to the instructions supplied, to provide safe and secure transportation to an authorized Boston Acoustics service representative, and to present proof of purchase in the form of your sales slip when requesting service.
www.bostonacoustics.com 300 Jubilee Drive Peabody, MA 01960 U.S.A. 978.538.5000 DCD, RadialVent and BassTrac are trademarks and PowerVent, Boston and Boston Acoustics are registered trademarks of Boston Acoustics, Inc. Dolby and Pro Logic are registered trademarks of Dolby Laboratory Licensing Corporation. © 1999 Boston Acoustics, Inc. All rights reserved. Specifications subject to change without notice.