Operating instructions

6
Connecting the PV1000 to Digital 5.1
Channel Home Theater Systems
NOTE: Power is always supplied to the subwoofer electronics unless it is unplugged. Make sure
your subwoofer and receiver are unplugged when making the connections.
Digital 5.1 home theater electronics dedicates one channel (the “.1” of 5.1) to reproduce the
special low-frequency (LFE) information (such as explosions and thunder) contained in digitally-
encoded soundtracks.
Select subwoofer-yes from your receiver’s set-up menu. Hooked up this way, the receiver’s amplifier
is relieved of having to reproduce the difficult low bass signals that can drive the receiver into
audible distortion.
Use an RCA cable (not included), as shown, to connect your digital receiver’s subwoofer output to
the PV1000’s L/mono input.
On the front panel, set the crossover to the none position.
subwoofer out
CAUTION: Disconnect sup
For continued protection
a
with same type fuse.
ATTENTION: Debrancher
a
Utiliser un fusible de recha
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
ATTENTION: Pour éviter tout risque de feu ou choc électrique,
ne pas exposer cet appareil à la pluie ou à l'humidité.
Line in
Line out
L / mono
R
NRTL/C
ANSI/UL-1492
LR106476
volume
0
1
2
3
4
5
6
7
8
9
10
11
12
crossover Hz crossover polarity
50 150
80 120 set none 0° 180°
Boston
FRONT PANEL