Operating instructions

9
Dolby Pro Logic and Dolby Digital
Line-Level System Connection (cont.)
Dolby Digital Systems
If your receiver or processor gives you a choice of subwoofer low-pass crossover settings, select one
around 120Hz. This will result in the smoothest overall system response, since the lower response
limit of the Micro80x satellite and Micro80c center channel is 120Hz.
Select “SMALL” for the front left/right speakers, the center channel speaker, and the surround speak-
ers on your receiver’s set-up menu. Select “SUBWOOFER-YES” on your receiver’s setup menu. Use
the wiring diagram shown on page 8.
If your Dolby Digital receiver has a fixed (nonadjustable) subwoofer low-pass crossover setting
below 100Hz, you may find the system sounds better when wired with both speaker wire and
line-level connections to the subwoofer, as shown below.
Select “SMALL” for the front left/right speakers, the center channel speaker, and the surround speak-
ers on your receiver’s setup menu. Select “SUBWOOFER-YES” on your receiver’s setup menu.
Main
speakers
Center
speaker
RightLeft
Left Micro80x
Receiver
Right Micro80x
LR
Speaker level in
Micro80pv Subwoofer
Micro80c
Surround
speakers
RightLeft
Left Micro80e Right Micro80e
Line in
Sub out