Owner`s manual

ManualsBrandsBoston Acoustics Manualsaudio & home theatreTVee 20

OWNER’S MANUAL / SAFETY INSTRUCTIONS / COMPLIANCE INFORMATION

TVee

Model 20

Television Entertainment Enhancement System

Español

Sistema de Mejora del

Entretenimiento Televisivo.

Francais

Système de perfectionnement

sonore pour télévision et

système de divertissement à

domicile

Italiano

Sistema di TV entertainment

avanzato

Swedish

System för bättre

TV-underhållning

Deutsch

System zur Steigerung der

Fernsehunterhaltung

Summary of content (8 pages)

PAGE 1
television entertainment enhancement system español Sistema de Mejora del Entretenimiento Televisivo.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS This symbol found on the apparatus indicates hazards arising from dangerous voltages. This symbol found on the apparatus indicates the user should read all safety statements found in the user manual. This symbol found on the apparatus indicates double insulation. Warning! To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Read these instructions. Keep these instructions.
PAGE 3
The Parts of TVee 1 2 3 4 5 6 7 8 INPUT R 20V 2.5A TRIM LEVEL 1 2 3 9 POWER L 1 234 INPUT TVee® Model 20 R TRIM LEVEL 1 2 3 POWER 20V 2.5A L 1 234 Audio connection cable 10 1 2 3 4 5 6 7 8 9 10 Status Indicator – Lights in various colors to indicate operating status. See the table below. IR Learn Button – Activates remote control learning mode. Mute Button – Lets you temporarily mute TVee. Volume Up and Down Buttons – Let you manually adjust the volume of the TVee.
PAGE 4
11 TVee® Model 20 WIRELESS ID 4321 12 230V~ 50Hz 0.5A VOLUME MIN 11 12 13 14 15 13 14 15 POWER 230V~ 50Hz 0.5A MAX Wireless ID Switch – Selects the “channel” for the wireless subwoofer signal. Set in the same position as 5. Volume – Adjusts the volume of the subwoofer to balance with the soundbar. Status Indicator – Lights green when the subwoofer is active and red when it is in mute mode. Power On/Off Switch – Turns the TVee subwoofer on or off. Normally it is left on all the time.
PAGE 5
Connect TVee Next you need to get an input signal into the TVee soundbar. All it takes is the audio connection cable that is supplied. There are two likely sources for a signal—your television or a cable television connection box. (The control box for a satellite system is for this purpose the same as a cable box. For simplicity we’ll call it a cable box, but it could be either one.) The main advantage of getting the signal from the cable box is that it is easier to set up.
PAGE 6
After this adjustment TVee should always be louder than the television speakers. Then you can use the television remote control to adjust the volume as you normally do. Fine Tune TVee Now that things are up and running, it’s time to adjust the subwoofer to blend with the soundbar speakers so the system produces the balanced, natural Boston sound. Start with the subwoofer volume control at the middle of its rotation range.
PAGE 7
Typically you’ll never need to adjust these switches. What are they for? If you have more than one TVee system in your house you can use different Wireless ID Switch settings so the systems won’t interfere with each other. Trim Level Switch – This changes the input sensitivity of TVee. If the output of your television is too low, you may need to change the trim level switch to “1” to make it louder. Conversely, if you hear distortion in the audio signal, try the “3” setting to make the input quieter.
PAGE 8
Limited Warranty Boston Acoustics warrants to the original purchaser of our TVee system that it will be free of defects in materials and workmanship in its mechanical parts for a period of 5 years from the date of purchase. The warranty period for the electrical components of TVee is 1 year.