HO7305A0TX / HO7305B0TX Huntleigh Turned-Leg Desk For assistance with assembly, contact: Southern Enterprises, Inc. Customer Service: 1-800-633-5096 service@seidal.com www.seifurniturestore.
Huntleigh Turned-Leg Desk Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
13) Quantity of 2 14) Quantity of 1 Small Drawer Bottom Panel Keyboard Drawer Bottom Panel 16) 17) Quantity of 1 Drawer Back Panel A) B) D) Bolt Quantity of 15 Cam Locks Cam Bolts Quantity of 7 Dia. 1/4x1-1/4” L G) Allen Wrench Quantity of 1 Quantity of 1 Left Drawer Side Panel Quantity of 1 Right Drawer Side Panel Quantity of 15 15) C) Wood Dowels E) Quantity of 4 F) Spring Washer Dia.1/4” Flat washer H) Quantity I) of 12 Screw Dia.
J) Quantity of 8 Cam Locks M) K) Bolt Quantity of 3 Bolts Dia. 5/32”x 3/4”L P) Quantity of 2 Quantity of 8 Dia. 1/4x1-1/2” L N) Quantity of 4 Cotton Mat Q) Bolt Dia. 1/4x1-3/4” L Cotton Mat Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the surface with rough or abrasive objects.
Huntleigh Turned-Leg Desk Assembly Instructions Insert Cam Locks (B) into corresponding holes on Middle Panel (6/7). Please do not overtighten cam locks. Stop when they feel secure. Screw Cam Bolts (A) into threaded holes on Back Panel (5). Attach Back Panel (5) to Middle Panel (6/7) by inserting Cam Bolts (A) and Wood Dowels (C) into corresponding holes until all panels meet. 7 6 Tighten Cam Bolts (A) by rotating Cam Locks (B) clockwise using Phillips screwdriver (not included).
G D Attach the Left/Right Side Panel (2/3) to pre-assembled unit from Figure 2 with Bolts (D/P/K), Spring Washers (E), and Flat Washers (F). E F Tighten Bolt with Allen Wrench (G). 2 8 G 3 Figure 3 Insert Cam Locks (B) into corresponding holes on pre-assembled unit from Figure 3. 1 Screw Cam Bolts (A) into threaded holes on Top Panel (4).
Attach Drawer Side Panels (10/11) to Drawer Front Panel (9) using Cam Bolts (I) and Cam Locks (J). Cover cam locks with adhesive pads (Q) as shown. J Q Insert Drawer Bottom Panel (13) into grooves of Drawer Side Panels (10/11), 9 and Drawer Back Panel (12). Attach Drawer Back Panel (12) to Drawer Side Panels (10/11) using Screws (H). Attach Knobs (L) to Drawer Front Panel (9) using Bolts (M) as shown. Tighten Bolts (M) and Screws (H) with Phillips screwdriver (not included).
Insert drawers into pre-assembled unit. Make sure all slides glide smoothly in and out. Cover holes on legs with Wood Plugs (O). Figure 7 Note: There is a lever located on male slides for Keyboard Drawer. Hold levers up or down while pulling on drawer in order to detach male slide from female slide. This will flip the front of the drawer down for keyboard usage.
Figure 9 Now your Huntleigh Turned-Leg Desk is ready to us! Figure 10 Page | 9
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.