Installation Guide

ASSEMBLY INSTRUCTIONS
HARDWARE USED
Wood Dowel x 2
Cam Bolt x 2
Cam Lock x 2
Paper Cover x 2
HARDWARE USED
Wood Dowel x 4
Cam Bolt x 4
Cam Lock x 4
Paper Cover x 4
10
11. Insert cam locks (3) into holes on
assembled unit on Figure 9.
Screw cam bolts (2) into holes on
bottom panel (B).
Attach bottom panel (B) to assembled
unit on Figure 9 by inserting wood
dowels (1) and cam bolts (2) into
corresponding holes until bottom (B)
and assembled unit meet.
Tighten by rotating cam locks (3)
clockwise with Phillips screwdriver.
Cover cam lock holes with paper
covers (16).
12. Insert cam locks (3) into holes in
assembled unit on Figure 11.
Screw cam bolts (2) into holes on
assembled unit on Figure 5.
Attach assembled parts from Figure 5 to
assembled unit on Figure 11 by
inserting wood dowels (1) and cam bolts
(2) into corresponding holes until units
meet.
Tighten by rotating cam locks (3)
clockwise with Phillips screwdriver.
Cover cam lock holes with paper covers
(16).
11
12
1
2
3
16
1
2
3
16
1
B
3
2
16
2
3
1
K
B
16