Installation Guide

ASSEMBLY INSTRUCTIONS
HARDWARE USED
Wood Dowel x 4
Cam Bolt x 4
Cam Lock x 4
Paper Cover x 4
HARDWARE USED
Wood Dowel x 2
Cam Bolt x 2
Cam Lock x 2
Paper Cover x 2
8
7. Insert cam locks (3) into holes in
assembled parts from Figure 6.
Screw cam bolts (2) into holes on vertical
panel (H).
Attach vertical panel (H) to assembled
unit on Figure 6 by inserting wood dowels
(1) and cam bolts (2) into corresponding
holes until vertical panel (H) and
assembled unit meet.
Tighten by rotating cam locks (3)
clockwise with Phillips screwdriver.
Cover cam lock holes with paper covers
(16).
8. Insert cam locks (3) into holes on shelf
(I).
Screw cam bolts (2) into holes on
assembled unit on Figure 7.
Attach shelf (I) to assembled unit on
Figure 7 by inserting wood dowels (1)
and cam bolts (2) into corresponding
holes until they meet.
Tighten by rotating cam locks (3)
clockwise with Phillips screwdriver.
Cover cam lock holes with paper covers
(16).
7
8
1
2
3
16
1
2
3
16
1
3
2
H
16
1
2
3
I
16