Installation Guide

ASSEMBLY INSTRUCTIONS
HARDWARE USED
Wood Dowel x 2
Cam Bolt x 2
Cam Lock x 2
Paper Cover x 2
HARDWARE USED
Screw 1/2” x 4
Magnet x 2
9
9. Insert cam locks (3) into holes on
vertical panel (J).
Screw cam bolts (2) into holes on
assembled unit on Figure 8.
Attach vertical panel (J) to assembled
unit on Figure 8 by inserting wood
dowels (1) and cam bolts (2) into
corresponding holes until vertical panel
(J) and assembled unit meet.
Tighten by rotating cam locks (3)
clockwise with Phillips screwdriver.
Cover cam lock holes with paper covers
(16).
10. Attach magnets (7) to bottom panel (B)
with screws (6).
Tighten screws with Phillips
screwdriver.
9
10
1
2
3
16
1
2
J
3
16
6
7
6
7
B