Installation Guide

ManualsBrandsBoston Loft Furnishings ManualsEnd TablesATG2729

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

service@seidal.com

www.seidal.com

PO:12813

CK927200TX

MIRRORED END TABLE

Assembly Instructions

Top supports up to 40 lb.

Summary of content (5 pages)

PAGE 1
CK927200TX MIRRORED END TABLE Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com PO:12813 Top supports up to 40 lb.
PAGE 2
CK927200TX MIRRORED END TABLE Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw diagrams below. 1 1 2PCS SIDE PANEL 4 CENTER PANEL A SCREW 1/4”x 5/8” 1PC 24PCS 2 2PCS TOP STRETCHER 5 MIRRORED TOP B Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth.
PAGE 3
CK927200TX MIRRORED END TABLE Assembly Instructions Step 1: Notice: Please do not tighten screws completely until all the screws are in place. Unit assembly should begin with parts turned upside down for Step 1. S Attach top stretcher (2) and bottom stretcher (3) to side panels (1) using screws (A) as shown Figure 1 Step 2: Turn the assembled metal base upright and attach center panel (4) using screws (B), then fully tighten all screws.
PAGE 4
Step 3: Carefully attach mirrored top (5) to the metal base using screws (A) as shown. Your mirrored end table assembly is now complete. Figure 3 Customer Service 1-800-633-5096 service@seidal.com Southern Enterprises, Inc.
PAGE 5
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.