Large TV/Media Stand MS070300TX- ANTIQUE WHITE MS070400TX- ANTIQUE BLACK Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.
Large TV/Media Stand Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below. You may receive extra hardware with your unit.
Large TV/Media Stand Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below . You may receive extra hardware with your unit.
Large TV/Media Stand Assembly Instructions Assembly Instructions: Wood may scratch easily. Be careful when assembling. Do not scratch. Step 1. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated on the front page. Step 2. Insert two Wood Dowels (A) into predrilled holes in Side Panel(2,3) each and two Wood Dowels(A) in Right Middle Panel(4). Be sure that the cross bar on the Right Middle Panel(4) faces the Left Side Panel(2). Step 3.
Large TV/Media Stand Assembly Instructions Step 1. Insert Wood Dowels(A) in predrilled holes in the Left Middle Panel(5) and Wood Dowels (A) in the other side of Fixed Shelf(6). Be sure the cross bar on the Left Middle Panel(5) faces the Right Side Panel(3). Step 2. Attach Left Middle Panel(5) to the Bottom Panel(1) and fasten by Bolts(B). Step 3. Screw Feet(8) and center foot(18) into Bottom Panel(1) and tighten.
Large TV/Media Stand Assembly Instructions Step 1. Insert the Wood Dowels(A) into Predrilled top holes in Side Panels(2,3) and Middle Panel(4,5). Step 2. Attach the Top Panel (11) into the Panels(2,3,4,5) with Bolts(B) and tighten. Quantity of 8 (A) 8mm x 30 mm Wood Dowel Quantity of 8 (B) 1/4” x 1” Bolt Figure 6 Step 1. Insert Back Panel(12) into grooves of side panels with Screw For Back(C) and tighten. Quantity of 20 (C) 3.5mm x 12 mm Screw For Back Figure 7 Step 1.
Large TV/Media Stand Assembly Instructions Step 1. Put the Drawer Bottom Panel(15) into inner grooves of Drawer Side Panels(14) and Drawer Face Panel(13). Step 2. Insert Nut(D) into predrilled holes on Drawer Back Panel(16), then be attach Drawer Back Panel(16) to end side of Drawer Side Panels(14),fasten with Bolts for Drawer(E) and tighten. Quantity of 4 (D) Metal Nut (E) 3/16” x 38 mm Bolt For Drawer Figure 9 Quantity of 4 Step 1.
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.
CAUTION The top shelf is intended for a flat screen television with a maximum overall width of 50” and supports up to 175 lb. The top shelf is NOT INTENDED for tube televisions. Each center shelf should not be loaded with more than 20 lb. Each side shelf should not be loaded with more than 15 lb. DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the maximum sizes and weights indicated may result in instability causing possible injury.
