Installation Guide

Step 7:
Turn the trunk base upside
down and attach legs (F) to
the bottom of trunk using
screws (L) as shown.
Step 8:
Attach Hinge (T) to back
panel (C) and top panel(A)
by using screws (M) as
shown and then tighten all
screw by phillips
screwdriver(not included)
Step 9:
Attach left support (N) and
right support (R) to the top
(A) and trunk base using
screws (M) and tighten with
Phillips screwdriver as
shown. Then put sponge
cushions (S) on front panel
(B) as shown. Close the
top. Top will close slowly.