Installation Guide

Figure 1
Assembly Instructions: Unpack
and lay parts on clean, padded
surface like carpet or blanket.
Check that you have all parts
indicated on the front page.
Please insert 4pcs Bolts (1)
through holes on both side Panel
(B & C) to tighten Back panels (A)
by Allen Wrench (7).
Please insert 2pcs Bolts (1)
through holes on both side Panel
(B & C) to tighten Tube (F) by
Allen Wrench (7).
Please insert 8pcs Bolts (1)
through holes on both side Panel
(B & C) to tighten both Frames (D
& E) by Allen Wrench (7).
Please insert 5pcs Short Bolts (2)
through holes on Hooks (H) to
attach 4pcs hooks to Bottom
Large frame (E) by Wrench (7)
Please insert 6pcs Spherical
Regulator (3) through holes on
side of both Side Panels (B & C) to
tighten 3pcs Cross bars (G) by
hands
WALL MOUNT CRAFT STORAGE RACK-MATT BLACK METAL WITH ESPRESSO BASKETS
Assembly Instructions