ITEM NO MS888500TX “CARSON”48”W CORNER TV STAND Assembly Instructions For assistance with assembly contact: Southern Enterprises, Inc. Customer Service 1-800-633-5096 service@seidal.com wwww.seidal.
“CARSON”48”W CORNER TV STAND Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw diagrams below. You may receive extra hardware with your unit.
“CARSON”48”W CORNER TV STAND Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw diagrams below. You may receive extra hardware with your unit.
“CARSON”48”W CORNER TV STAND Assembly Instructions 1 2 1 3 3 Assembly Instructions: Wood may scratch easily, Be careful when assembling. Do not scratch. Step 1 Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated on the front page. Step 2 Connect the Left and Right Back Frame (A, C), the Back Panel(B) with 4pcs Wood Dowel (1),2pcs Cam Bolts (2) and 2pcs Cam Lock (3).
“CARSON”48”W CORNER TV STAND Assembly Instructions Attach 1pc Plastic Drawer Stopper (8) to Lower front rail (F) with 1pc Wood Screw (7) as shown. 8 7 F Figure 4 Connect the Lower Front rail (F) to the Left and Right Side Frame (G,H) with 2pcs Wood Dowels (1). Then use 2pcs flat screw(10) and 2pcs Washer (13) to tighten them. Figure 5 3 2 10 1 1 1 2 3 2 10 11 3 1 2 Figure 6 Connect the assembled unit at STEP3 and STEP5 with 6pcs Cam Bolt (2), 4pcs Cam Lock (3) and 4pcs Wood Dowel (1).
“CARSON”48”W CORNER TV STAND Assembly Instructions Connect the Top Panel(I) with 8pcs Wood Dowel (1),4pcs Cam Bolts (2) and 4pcs Cam Locks (3). 3 2 1 1 2 1 1 3 3 1 2 1 1 2 1 I Figure 7 Connect the Left and Right Drawer Sides (J,L) ,Drawer backs (K), Drawer bottoms (M) and Front Drawer Panel(N) with Cam Bolts (12)and 4pcs Cam Locks (11) and 4pcs screw (9). Fix the Handle (5) to the Drawer Front (N) with 4pcs Bolts (6).
PartsReplacement ReplacementForm Form Parts Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product.
CAUTION The top shelf of this cabinet is intended for plasma/LCD televisions having a maximum screen size of 46” and weight of 175 lb. The top shelf is NOT INTENDED for tube televisions. DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the maximum sizes and weights indicated may result in instability causing possible injury. This unit contains a permanent warning sticker located on under side of top shelf or inside drawer. Do not allow children under 16 years to move the cart.
