Providence Convertible Fireplace Tower FA980700TX – New Mahogany FA980800TX – Antique White Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.
Providence Convertible Fireplace Tower Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
2 Quantity Of 2 Back Top Panel 4 Quantity Of 1 Left Door 8 Quantity Of 1 Left Frame Quantity Of 1 Right Frame 6 3 Quantity Of 1 5 Middle Shelf Panel 7 Right Door 9 Quantity Of 1 Quantity Of 1 Quantity Of 1 Middle Shelf Panel 10 Quantity Of 4 Leg Bottom Panel 11 Quantity Of 4 Leg 12 Quantity 13 Of 1 Quantity Of 1 Back Panel Wood Holder Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish.
Providence Convertible Fireplace Tower Assembly Instructions Turn the middle shelf panel (5) over and use 2pcs round head screws (J) to connect magnet (H) to middle shelf panel (5) with Phillips screwdriver. H J 5 Figure 1 Attach middle shelf panels (5) and (8) to the left frame (3) by inserting wood dowels (A). Repeat step with right frame (4) and middle shelf panels (5) and (8) for assembly.
Providence Convertible Fireplace Tower Assembly Instructions Attach legs (10) to assembled unit by rotating the legs (10) clockwise tightly with hand. 4 10 3 10 Figure 3 Use legs (11) through bottom panel (9) to connect bottom panel (9) to the four legs (10) by rotating legs (11) clockwise tightly with hand.
Providence Convertible Fireplace Tower Assembly Instructions D D D Use 6pcs flat head screws (D) to connect front top panel (1) to back top panel (2) via attached hinges. Tighten flat head screws (D) with Phillips screwdriver. 2 1 Figure 5 Attach top panels (1) and (2) to assembled unit by inserting 4pcs wood dowels (A). 2 1 A C C A Tighten bolts (B) with Phillips screwdriver. B 4 3 Figure 6 Use 4pcs bolts (B) through 4pcs flat washers (C) to connect top panel (1) and (2) to assembled unit.
Attach the back panel (12) onto the back of the unit by using 16pcs screws (E). E 12 Figure 7 Use 8pcs screws (F) to connect door panels (6) and (7) to assembled unit with Phillips screwdriver.
Providence Convertible Fireplace Tower Assembly Instructions Place firebox (G) into the back of the unit. Figure 9 Attach wood holder (13) by inserting 2pcs flat head screws (I) into corresponding predrilled holes and tighten with Phillips screwdriver.
Providence Convertible Fireplace Tower Assembly Instructions Use screws (K) to connect brackets (L) to left frame (3) and right frame (4) as shown. L O L Tighten screws (K) with Phillips screwdriver. Drill 1/4 inch pilot holes in near proximity of brackets (L) attached to the left frame (3) and right frame (4), then, tap the plastic anchor (N) into the wall. Use screws (M) to connect brackets (L) to plastic anchors (N) on wall. Tighten screws (M) with Phillips screwdriver.
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please examine this product carefully upon immediate receipt. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.
