MS990700TX “Remington” TV/Media StandMission Oak Finish Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.
“Remington” TV/Media Stand Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below.
“Remington” TV/Media Stand Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below.
“Remington” TV/Media Stand Assembly Instructions L Assembly Instructions: Wood may scratch easily. Be careful when assembling. Do not scratch. Step 1. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated on the front page. Step 2. Put the Bottom Panel (A) on the soft working surface. Step 3. Insert the Wood Dowels (1) into predrilled holes in Bottom Panel (A) and Middle Panel (D,E). Step 4.
“Remington” TV/Media Stand Assembly Instructions Step 1. Insert Wood Dowels (1) into predrilled holes in Side Panels (B,C) and Middle Panels (D,E). Step 2. Attach the Top Panel (H) to Side Panels (B,C) and Middle Panels (D,E) using Bolt (2) and Washer(14). (1) 8mm x 30 mm Wood Dowel (14) Quantity of 8 Quantity of 8 Washer (2) 1/4” x 1” Bolt Figure 4 Quantity of 8 Step 1. Insert Back Panel (I) into grooves of side panels(B,C), Top Panel (H) and Bottom Panel (A) using Screw For Back (7) and tighten.
“Remington” TV/Media Stand Assembly Instructions Step 1. Attach Bracket (9) on the back side of Top Panel (H) using Screw For Bracket(10). Step 2. Drill 3/16” dia pilot holes on wall near proximity of Bracket(9). Insert Plastic Anchor (11) into wall; You may Need to use a hammer to tap them gently. Step 3. Fasten Bracket(9) using Screw For Wall(12) into the Plastic Anchor(11). Quantity of 4 (9) Bracket Quantity of 4 (10) 3.
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.
CAUTION The top shelf is intended for a flat screen television with a maximum overall width of 50” and supports up to 175 lb. The top shelf is NOT INTENDED for tube televisions. Each center shelf should not be loaded with more than 20 lb. Each side shelf should not be loaded with more than 15 lb. DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the maximum sizes and weights indicated may result in instability causing possible injury.