KA327700TX MARTINVILLE KITCHEN CART - White Assembly Instructions For assistance with assembly contact： Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.
MARTINVILLE KITCHEN CART - White Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw. Carefully study the Screw diagrams below. You may receive extra hardware with your unit. No.
A Long Bolt Quantity of 11 Small Bolt E Quantity of 3 ( M6 X 40 ) Quantity of 2 Flat Washer G Quantity of 4 Cam Lock I Bar Handle K H-Profile D Spring Washer F Cam Bolt H Quantity of 2 Quantity of 4 Quantity of 12 Metal Pin Quantity of 3 J Quantity of 6 Handle Screw X 22mm Quantity of 4 Door Spring M Quantity of 4 Barrel Nut ( M6 X 50 ) C B Quantity of 1 L Allen Key N Wood Screw X 32mm Quantity of 1 Quantity of 8
O Quantity of 11 Wood Button Q P Quantity of 2 Castor With Lock Quantity of 2 Castor Without Lock Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the surface with rough or abrasive objects. Assembly Tool Required No.2 Phillips Screwdriver (Not Included) For replacement parts or questions, please Call Customer Service at 1-800-633-5096.
Martinville Kitchen Cart - White Assembly Instructions Attach Cam Bolts (F) into Table Top (1) and Bottom Panel (10) as shown. Tighten using Screwdriver. Figure 1 Attach Side Frame (R) (2) to Table Top (1) with Long Bolts (M6x50) (A). Tighten using Allen Wrench (L) provided. Attach Back Apron (5) to the unit with Long Bolts (M6x50) (A). Tighten using Allen Wrench (L) provided. Slide Upper Back Panel (4) into groove between the aprons as shown.
Insert Center Panel (8) onto the attached Cam Bolts (F) on the unit and secure using Cam Locks (G). Tighten Cam Locks (G) using Screwdriver. Attach Front Apron (9) to Center Panel (8) as shown by using Short Bolt (M6 X 40) (C). Tighten using Allen Wrench (L) provided. Slide 1 Pc Back Panel (6) between Side Frame (2) and Centre Panel (8). Connect 2pcs of Back Panels (6) with H-Profile (M) as shown. Then slide into the grooves of Centre Panel (8) and Back Apron (5) as shown.
Attach Towel Bar (13) onto the unit as shown with Short Bolts (M6 X 40) (C), Spring Washers (D) and Flat Washers (E). Tighten using Allen Wrench (L) provided. Attach Castors With Lock (P) and Castors Without Lock (Q) as shown. Figure 5 Insert Metal Pins (H) into the unit as shown. Place Shelves (R) (7A) and Shelf (L) (7B) as shown.
Attach Drawer Side Apron (R) (12B) and Drawer Side Apron (L) (12C) to Drawer Front (12A) as shown. Tighten using Wood Screw (N) with Screwdriver. Slide Drawer Bottom Panel (12E) into assembled unit. Place the Drawer Back Panel (12D) onto assembled unit. Tighten using Wood Screws (N) with Screwdriver. Tighten Bar Handle (I) and Handle Screw (J) with Screwdriver. Figure 7 Insert Door Springs (K) into Doors (11) as shown.
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Quantity Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.
