Handbook

The Remote Control
43
To return to the Level screen from any Rate screen, press and hold Cuntil Pulse Width Area 1 is displayed, then press and hold Cagain to see the Level screen. If you don’t have access to the Pulse Width option, the Level screen will appear right away. To Adjust Stimulation Pulse Width 1. From the Level screen make a long Cbutton
press to Rate Area 1.
Note: If you don’t have access to the Rate option, the long
press will take you directly to the Pulse Width Area 1 screen.
2. If the Rate Area 1 screen is displayed, make
another long Cbutton press to Pulse Width Area 1. If this is the area you want to adjust, press either S or T to increase or decrease the Pulse Width.
3. To move to another area, press Cbriefly (a “normal” press) to cycle through your
programmed areas until you find the Pulse Width Area screen (2, 3 or 4) that you want.