User Guide

Using the Medical Equipment
21
Selecting Areas for Level Control Your Remote Control may have as many as four therapy areas stored for your use. Each area will have a name or a number (1 through 4) which was assigned during your programming at the clinic.The stimulation level for each of these areas is controlled from an individual “area level” screen. To change the stimulation strength of a single area: 1. From the main Level screen, press the Cbutton
as many times as necessary to cycle through your programmed area Level screens.
Note: Button presses will move from one area to the next and will eventually return you to the Level
screen.
2. When the named or numbered area that you want to adjust is shown on the screen, press
S (increase) or T (decrease) to change the stimulation level for that area.
When you’ve finished making your change, the Remote Control will return to the Level screen.