User Guide

Help

“Action Failed” on the Display

If the Remote Control displays the error screen

shown at right, try to make a note of the numbers (the

error code) on the top line. Then press D, wait a few

seconds, and try the action again.

Please call our Customer Service Department at your

earliest convenience to report the error code.

Note: The remote will go to idle mode when D is pressed,

or within fifteen seconds if D is not pressed.

A special “Action Failed” error message is displayed by the Remote Control when the Trial

Stimulator battery is changed. Please see page 30 for information on how to proceed if you

have to change the stimulator battery.

Accessories

Washing the Velcro

Belt

1. Wash the belt with mild soap and warm water.