User Manual

Physician Lead Manual

Connecting to the Trial Stimulator

1. Wipe fluids off the exposed lead connections.

2. Disconnect and discard the OR cable extension, unless extra

length is needed for trial use.

3. Connect the OR cable(s) to the lead(s) or lead extensions: Slide

the locking lever to “0,” fully insert the end of the extension into

the port, slide the locking lever to “1.”

4. If two leads are used, connect the cable labeled 1-L to the upper

or left lead, and the cable labeled 2-R to the lower or right lead.

Labels are provided.

5. Next, connect the right and left-sided OR cables to the Trial Stim-

ulator, referencing the position labels previously fixed to the

cables.

If only one lead is used, connect the OR cable to 1-L on the Trial

Stimulator.