System Handbook

Patient System Handbook
48
Note: The Remote Control will beep to notify you if you reach a preset limit while increasing or
decreasing the Pulse Width.
To return to the Level screen from any Pulse Width screen, press and hold Cuntil Rate
Area 1 is displayed, then press and hold Cagain to see the Level screen. If you do not have
access to the Rate option, the Level screen will appear right away.
To Adjust Stimulation Rate
1. From the Level screen make a long Cbutton
press to Pulse Width Area 1.
Note: If you do not have access to the Pulse Width
option, the long press will take you directly to the
Rate Area 1 screen.
2. If the Pulse Width Area 1 screen is displayed,
make another long Cbutton press to Rate Area 1.
If this is the area you want to adjust, press either
S or T to increase or decrease the Rate.