User Manual

18
Physician Implant Manual
Note: • If the connector plug is used in port 2-R, it is still necessary
to tighten the setscrew as described.
• The wrench is torque-limited and cannot be overtightened.
• Ensure that the lead is fully inserted before tightening the
setscrew to prevent lead damage.
3. Place the IPG in the subcutaneous pocket with “This Side Up”
facing anterior towards the skin.
4. Coil excess lead or extension under the IPG.
Note: To confirm good connections, check impedances.
5. Secure the IPG in the pocket by suturing through the holes in the
connector.
6. Close and dress the wound(s).