User Manual

24
Physician Implant Manual
Patient Remote Control
Basic Operation
The Remote Control communicates with the implant through a radio
frequency (RF) telemetry link from a distance of up to two feet. The
Remote Control turns on automatically when any button is pressed.
During normal patient use, the Remote Control will turn off automati-
cally after 60 seconds of non-use. Button functions are identified
above the buttons on the LCD screen. These function identifiers may
change depending upon the actions being performed.
Note: Electronic interference and poor orientation can result in a
lack of communication that will be displayed as “No
Response” on the device’s LCD screen. If this occurs, move the
remote closer to the IPG and try the previous action again.