User Manual

Patient Remote Control

For Rate and Pulse Width: When the desired option screen is dis-

played, first use the

SEL 1 button to find the desired area, then use the

T or S button to decrease or increase the parameter setting for that

area.

To restore a program: Press

SEL 1 to highlight the desired program,

then press

SEL 2 [RESTR]. The restore function returns a program to

the last clinic programmed settings.

Physician Mode

Patient-restricted physician screens provide access to these advanced

programming and interrogation functions:

• Communication with the clinician programmer

• Electrode and stimulation parameter programming

• Electrode impedance monitoring

• Remote Control and trial stimulator resetting/re-linking

Entering Physician Mode

1. To access physicians screens, press

SEL 1 and SEL 2 simulta-

neously.

2. The Remote Control will request a code. (To obtain the code,

refer to the Physician Systems Handbook.) Use the S and T

buttons to scroll through the characters, and the

SEL 1 [SEL] but-

ton to advance to the next entry. After entering the code, press

SEL 2 [ENTER].

Once the code is entered, the screen will appear as shown.