User Manual

32
Physician Implant Manual
Parameters
1. Use the
SEL 1 button to cycle through various parameters includ-
ing amplitude, rate, and pulse width, and to program or view
another area.
2. Use the T (down) and S(up) buttons to adjust the selected
parameter.
Exiting Clinician’s Programming Screen
1. Upon completion, press
SEL 1 and SEL 2 simultaneously. This
will advance to the PROGRAMS screen.
2. Select the program number you wish to save to by pressing
SEL 1. You can overwrite an existing program or save to an
empty program slot (*) if one is available.
3. Press the up button (S) to save. You will return to the clinician
Options screen.
For more information on how to use the physician screen, see the
Physician Systems Handbook.
Programmer Communication
The clinician’s programmer can communicate with either an external
trial stimulator or an IPG. In order to begin a programming session,
the clinician programmer and the Remote Control infrared windows
must be aligned.
Arrange for the patient to be seated within two feet of the Remote
Control to ensure a complete communication link from the program-
mer to the stimulator.
For instructions on how to use the clinician’s programmer with the
BionicNavigator software to program the IPG and transfer programs
to the Remote Control, see the Physician Systems Handbook.