User Manual

28
Physician Lead Manual
Connecting to the Trial Stimulator
1. Wipe fluids off the exposed lead connections.
2. Disconnect and discard the excess OR cable extension, unless
extra length is needed for trial use.
3. Connect the OR cable(s) to the lead(s) or lead extensions: Slide
the locking lever to “0,” fully insert the end of the extension into
the port, slide the locking lever to “1.”
4. Connect the cable labeled 1-L to the upper or left lead, and the
cable labeled 2-R to the lower or right lead. Labels are provided.
5. Connect the right and left-sided OR cables to the Trial Stimula-
tor, referencing the position labels previously fixed to the cables.