Handbook

Patient Trial Handbook

Basic Operation

When it is not being used the Remote Control is in a “sleep” mode. Press any button and the Remote

Control will wake up and look for the stimulator. Once connected, you can make adjustments. When

you are done, the Remote Control will go to sleep after 60 seconds.

Good communication between the implant and the Remote Control is very important. This is the

reason you’ll often see the message “Connecting...” while you are adjusting the stimulation. This is

normal because the Remote Control continually checks for the stimulator.

Note: If you have trouble communicating with the stimulator, the message “No Response” will

appear on the Remote Control screen. See “Help” on page 26 for more information.