System Handbook

The Remote Control
23
If you selected Rate or Width
1. If the pain area you want to “option” is not
displayed on the screen, first press
SEL 1 to
find the area.
2. When the desired area is displayed, press
T
or
S to decrease or increase the Rate or
Width (whichever you chose) to that area.
3. If you want to adjust the same option for
another area, press
SEL 1 to find the area.
Note: The Remote Control will beep to notify you
if you reach a preset limit while increasing
or decreasing either the Rate or Width.
4. When you’ve made all of your changes for one option, press
SEL 2 [BACK] to return to the
options screen.
5. Press
SEL 1 to work with another option (as described above), or press SEL 2 [NEXT] to return to
the main screen.