User Manual Part 1

USING THE PROGRAMMER/RECORDER/MONIT
OR
DATA MANAGEMENT
2-11
• Yellow—indicates Attention conditions such as the following:
– The selected device parameter value is not recommended, but is
allowed
– Device and patient diagnostic information that should be addressed
When a red Warning or yellow Attention button displays in the toolbar, click the
button. The Parameter Interactions screen will display, with information about
corrective action.
DATA MANAGEMENT
The PRM system allows you to manage patient and pulse generator data by
viewing, printing, storing, or retrieving it. This se ctio n describes the P RM data
manage me nt capabilities.
Patient Information
Information about the patient can be stored in pulse generator memory. The
information is accessible from the Summary screen by selecting the Patient
icon. This information includes, but is not limited to, the following:
• Patient and physician names
• Pulse generator serial number
• Implant date
• Lead configurations
• Implant test measurements
The information can be retrieved at any time by interrogating the pulse
generator and viewing it on the P RM screen or printing it as a report.
Disk Operations
The PRM system allows you to store patient data on a removable data dis k.
Toaccessthedatastoredonadisk,first se lect the Utilities button, then select
the Disk tab. Insert a disk into the disk drive, and select one of the following
disk options:
• Read Disk—allows you to retrieve saved data from a patient data disk
- DRAFT -