Owner`s manual

11
The Snooze Feature
If you want to sleep a while longer after the alarm sounds you can use the
“Snooze “ feature. Simply touch the outer metal rim around the Duo-i. This will
delay the alarm for ten minutes. Each additional touch of the rim increases
the length of the “Snooze alarm delay by 5 minutes. The maximum delay is 60
minutes. The display shows the time and a ashing Alarm icon.
To see how much “Snooze” time is left touch the metal rim once. If you touch the rim again another ve minutes is added to
the “Snooze time for each additional touch.
To cancel the “Snooze” function press the alarm 1 or alarm 2 button for the active Alarm or the POWER/VOLUME button.
Sleep Function
You can set the Horizon Duo-i to play a radio station or your iPod for up to 90 minutes.
After the specied time the Duo-i shuts o.
1
Select the source and set the volume level. Use the MODE control to highlight
the Sleep icon in the display.
2
Press the MODE control. The Sleep icon and “OFF” will ash in the display.
3
Turn the MODE control clockwise until the number of minutes you want is
displayed.
4
Press the MODE control. The brackets around the Sleep icon will ash a few
times. The display will return to its previous state with the Sleep icon lit.
In this example the Sleep turn o delay is set to 30 minutes.
Notes:
• TocanceltheSleepdelaybeforeithasnishedpressthePOWER/VOLUME control
to turn o the Duo-i.
• Touchthemetalrimaround the Duo-i to display the remaining time of the Sleep delay. Touching the rim a second time
will adjust the remaining sleep time.
Touch Sensitive Rim